BDS 2.5" Radius Arm Lift Kit (2020-2022 Ford F450 Super Duty 4WD) (1915H) BDS 2.5" Radius Arm Lift Kit (2020-2022 Ford F450 Super Duty 4WD) (1915H) BDS Suspension IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.BDS 2.5" radius arm lift systems for the 2020 Ford F450 Super Duty offer improved performance. These kits use full length ProRide coil springs designed to improve the stance of your Super Duty while taking performance, capability and ride quality to the next level with clearance for 35" tires. Starting of the full-length ProRide dual rate coil springs provide the lift and improve overall ride quality. In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These brawny arms are built from 1-3/4" OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing. The heavy wall tubular construction improves strength while correcting caster with a lower cam slot. At the frame mount, a large OE-style rubber bushing is used to better isolate of NHVs and allow for quiet operation without any need for maintenance. The bushings offer superior durability and quieter operation than arms with heims and flex joints. Also upgraded as part of these new 2.5" lift systems is a high strength replacement track bar designed to recenter the front axle with the lift installed. The new track bar is adjustable, built from 1-3/8" solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length. At one end these use a greaseable, high-durometer polyurethane bushing and the other end a heavy duty ball joint. This setup offer strength, comfort and quiet operation over track bars that use heims. Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle. Available with either NX2 or Fox 2.0 Performance Series front/rear shocks. In the rear, these kits use a 2" lift block and new black e-coated u-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Take your new Super Duty to the next level these new 2.5" radius arm systems from BDS Suspension. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Designed for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).2. Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section.3. Installation requires a torque wrench capable of 405 ft-lbs.4. Wheel/Tire Specs:- Max Tire Size: 35x12.50- Front Wheel: 20x8.25, 8.76" BS- Rear Outer: 20x8.25, -3.33" BS- Rear Inner: 20x8.25, 9.11" BS Specifications Lift Height Front (base kit): 2.5" Radius Arm/Coil SpringRear (base kit): 1" Block Tire and Wheel Combinations 35x12.50 w/ and back spacing*Trimming may be required* Installation Est. Installation: 5 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsClick Here for PDF 1 of 2Click Here for PDF 2 of 2 Vehicle Fitment Data Make Model Year Range Ford F450 Super Duty 4WD 2020-2022 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 013207 2020-2022 Ford F-450 4wd 2" Rear Block K (1) 013263 2020-2022 Ford F-450 Super Duty 4wd 2.5" (1) 033251 2005-2022 Ford Super Duty 2.5" Coil Spri (1) 123251 Radius Arm Box Kit (2) 85717 Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1 (2) 85720 Shock- 24.00 x 14.50 x 2-3/8 - S50/EB2

BDS 2.5" Radius Arm Lift Kit (2020-2022 Ford F450 Super Duty 4WD) (1915H)

Code: 1915H
$1,969.78
In Stock
  • FREE SHIPPING ($100+)

  • 30 DAY RETURNS

  • LIVE SUPPORT

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


BDS 2.5" radius arm lift systems for the 2020 Ford F450 Super Duty offer improved performance.

These kits use full length ProRide coil springs designed to improve the stance of your Super Duty while taking performance, capability and ride quality to the next level with clearance for 35" tires. Starting of the full-length ProRide dual rate coil springs provide the lift and improve overall ride quality. In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These brawny arms are built from 1-3/4" OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing. The heavy wall tubular construction improves strength while correcting caster with a lower cam slot. At the frame mount, a large OE-style rubber bushing is used to better isolate of NHVs and allow for quiet operation without any need for maintenance. The bushings offer superior durability and quieter operation than arms with heims and flex joints. Also upgraded as part of these new 2.5" lift systems is a high strength replacement track bar designed to recenter the front axle with the lift installed. The new track bar is adjustable, built from 1-3/8" solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length. At one end these use a greaseable, high-durometer polyurethane bushing and the other end a heavy duty ball joint. This setup offer strength, comfort and quiet operation over track bars that use heims. Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle. Available with either NX2 or Fox 2.0 Performance Series front/rear shocks.

In the rear, these kits use a 2" lift block and new black e-coated u-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Take your new Super Duty to the next level these new 2.5" radius arm systems from BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Designed for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).
2. Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section.
3. Installation requires a torque wrench capable of 405 ft-lbs.
4. Wheel/Tire Specs:
- Max Tire Size: 35x12.50
- Front Wheel: 20x8.25, 8.76" BS
- Rear Outer: 20x8.25, -3.33" BS
- Rear Inner: 20x8.25, 9.11" BS

Specifications

Lift Height
Front (base kit): 2.5" Radius Arm/Coil Spring
Rear (base kit): 1" Block

Tire and Wheel Combinations

35x12.50 w/ and back spacing
*Trimming may be required*


Installation

Est. Installation: 5 hours
Difficulty Level (easy 1 - 5 complicated): 3
Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Year Range
Ford F450 Super Duty 4WD 2020-2022

Base Kit Components

These components are subject to change based upon your selections.
Qty Part# Description
(1) 013207 2020-2022 Ford F-450 4wd 2" Rear Block K
(1) 013263 2020-2022 Ford F-450 Super Duty 4wd 2.5"
(1) 033251 2005-2022 Ford Super Duty 2.5" Coil Spri
(1) 123251 Radius Arm Box Kit
(2) 85717 Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1
(2) 85720 Shock- 24.00 x 14.50 x 2-3/8 - S50/EB2

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


BDS 2.5" radius arm lift systems for the 2020 Ford F450 Super Duty offer improved performance.

These kits use full length ProRide coil springs designed to improve the stance of your Super Duty while taking performance, capability and ride quality to the next level with clearance for 35" tires. Starting of the full-length ProRide dual rate coil springs provide the lift and improve overall ride quality. In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These brawny arms are built from 1-3/4" OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing. The heavy wall tubular construction improves strength while correcting caster with a lower cam slot. At the frame mount, a large OE-style rubber bushing is used to better isolate of NHVs and allow for quiet operation without any need for maintenance. The bushings offer superior durability and quieter operation than arms with heims and flex joints. Also upgraded as part of these new 2.5" lift systems is a high strength replacement track bar designed to recenter the front axle with the lift installed. The new track bar is adjustable, built from 1-3/8" solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length. At one end these use a greaseable, high-durometer polyurethane bushing and the other end a heavy duty ball joint. This setup offer strength, comfort and quiet operation over track bars that use heims. Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle. Available with either NX2 or Fox 2.0 Performance Series front/rear shocks.

In the rear, these kits use a 2" lift block and new black e-coated u-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Take your new Super Duty to the next level these new 2.5" radius arm systems from BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Designed for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).
2. Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section.
3. Installation requires a torque wrench capable of 405 ft-lbs.
4. Wheel/Tire Specs:
- Max Tire Size: 35x12.50
- Front Wheel: 20x8.25, 8.76" BS
- Rear Outer: 20x8.25, -3.33" BS
- Rear Inner: 20x8.25, 9.11" BS

Specifications

Lift Height
Front (base kit): 2.5" Radius Arm/Coil Spring
Rear (base kit): 1" Block

Tire and Wheel Combinations

35x12.50 w/ and back spacing
*Trimming may be required*


Installation

Est. Installation: 5 hours
Difficulty Level (easy 1 - 5 complicated): 3
Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Year Range
Ford F450 Super Duty 4WD 2020-2022

Base Kit Components

These components are subject to change based upon your selections.
Qty Part# Description
(1) 013207 2020-2022 Ford F-450 4wd 2" Rear Block K
(1) 013263 2020-2022 Ford F-450 Super Duty 4wd 2.5"
(1) 033251 2005-2022 Ford Super Duty 2.5" Coil Spri
(1) 123251 Radius Arm Box Kit
(2) 85717 Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1
(2) 85720 Shock- 24.00 x 14.50 x 2-3/8 - S50/EB2

Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is."Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days