Morimoto XB LED Tails: Wrangler JK (Pair) (LF450) Morimoto XB LED Tails: Wrangler JK (Pair) (LF450) Morimoto Stock Sucks: No doubt the Wrangler JK is a capable off-roader, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable 2007-2018 Jeep Wrangler tail lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too! Compatible: With all Wranglers from 2007-2018, these complete tail light assemblies will swap directly in place of the original JK tail lights, use all of the stock mounting points, and should only take around 15 minutes to install. Plug n Play: Wiring is easy too! The Morimoto XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed! Style: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your Wrangler are available solely with a carbon effect bezel, which will still allow the center to illuminate red. Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Wrangler, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke. Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that our shop carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!TECH SPECSMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)Input: Mopar Multi-Pin OEMLight Source: SSC LED (Red)Compliance: IP67WHAT'S INCLUDEDTAIL LIGHTS: 2x (One Set) Carbon Look 07-18 Wrangler XB LEDWarranty: 5 YearsFITMENT & COMPATIBILITYJEEP WRANGLER JK: 2007-2018REPLACES JEEP PART #: 55077890AF, 55077891AFNOTE: Not compatible with non-US spec trucksMEETS: DOT, SAE, FMVSS108 StandardsREQUIRED ADDITIONAL ACCESSORIESN/AOTHER FITMENT EXCLUSIONSN/AOEM Part Numbers55077890AF, 55077891AFINSTRUCTIONSClick Here for Installation Guide

Morimoto XB LED Tails: Wrangler JK (Pair) (LF450)

Code: LF450
Sale
$419.76 $349.80
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

Stock Sucks: No doubt the Wrangler JK is a capable off-roader, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable 2007-2018 Jeep Wrangler tail lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too!

Compatible: With all Wranglers from 2007-2018, these complete tail light assemblies will swap directly in place of the original JK tail lights, use all of the stock mounting points, and should only take around 15 minutes to install.

Plug n Play: Wiring is easy too! The Morimoto XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!

Style: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your Wrangler are available solely with a carbon effect bezel, which will still allow the center to illuminate red.

Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Wrangler, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that our shop carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!


TECH SPECS

Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Input: Mopar Multi-Pin OEM
Light Source: SSC LED (Red)
Compliance: IP67


WHAT'S INCLUDED

TAIL LIGHTS: 2x (One Set) Carbon Look 07-18 Wrangler XB LED
Warranty: 5 Years

FITMENT & COMPATIBILITY

JEEP WRANGLER JK: 2007-2018
REPLACES JEEP PART #: 55077890AF, 55077891AF
NOTE: Not compatible with non-US spec trucks
MEETS: DOT, SAE, FMVSS108 Standards

REQUIRED ADDITIONAL ACCESSORIES

N/A


OTHER FITMENT EXCLUSIONS

N/A


OEM Part Numbers

55077890AF, 55077891AF


INSTRUCTIONS

Click Here for Installation Guide

Stock Sucks: No doubt the Wrangler JK is a capable off-roader, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable 2007-2018 Jeep Wrangler tail lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB LED tail lights too!

Compatible: With all Wranglers from 2007-2018, these complete tail light assemblies will swap directly in place of the original JK tail lights, use all of the stock mounting points, and should only take around 15 minutes to install.

Plug n Play: Wiring is easy too! The Morimoto XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!

Style: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your Wrangler are available solely with a carbon effect bezel, which will still allow the center to illuminate red.

Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Wrangler, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.

Trusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that our shop carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact us!


TECH SPECS

Material: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)
Input: Mopar Multi-Pin OEM
Light Source: SSC LED (Red)
Compliance: IP67


WHAT'S INCLUDED

TAIL LIGHTS: 2x (One Set) Carbon Look 07-18 Wrangler XB LED
Warranty: 5 Years

FITMENT & COMPATIBILITY

JEEP WRANGLER JK: 2007-2018
REPLACES JEEP PART #: 55077890AF, 55077891AF
NOTE: Not compatible with non-US spec trucks
MEETS: DOT, SAE, FMVSS108 Standards

REQUIRED ADDITIONAL ACCESSORIES

N/A


OTHER FITMENT EXCLUSIONS

N/A


OEM Part Numbers

55077890AF, 55077891AF


INSTRUCTIONS

Click Here for Installation Guide

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed, Lift Kits 4 Vets will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to  Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,  Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days