Zone Offroad 3" Coil Spring Lift Kit (2007-2011 Jeep Wrangler JK 4WD 2DR) (ZONJ12)
-
FREE SHIPPING ($100+)
-
30 DAY RETURNS
-
LIVE SUPPORT
Get the look and the performance you want for your Jeep. This 3" Lift Kit for your 2 Door 2007 - 2011 Jeep Wrangler (JK) will clear 35" tires and includes heavy-duty coil spacers that offer a dramatic improvement in both ground clearance and wheel travel.
**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**
QUICK SPECS
Front Lift Height | 3" |
Rear Lift Height | 3" |
Front Lift Method | Coil Springs |
Rear Lift Method | Coil Springs |
Lift Type | Lift Kit |
Wheel Size | 16 x 8 |
Back Spacing | 4.5" |
Max Tire Size | 35 x 12.5 |
Wheel Size 2 | 17 x 9 |
Back Spacing 2 | 4.5" |
Max Tire Size 2 | 35 x 12.5 |
Wheel Size 3 | 18 x 9 |
Back Spacing 3 | 4.5" |
Max Tire Size 3 | 35 x 12.5 |
Is Adjustable | No |
Metal Cutting Required | No |
Accommodates Factory Wheels | No |
Welding Required | No |
FEATURES
- Brake line relocation brackets increase wheel travel and allow use of factory brake lines.
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Full length replacement coil springs add additional ride height while maintaining ride quality.
- Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll.
- Rear track bar bracket correctly positions rear axle under vehicle.
IN THE BOX
- All Necessary Mounting / Installation Hardware
- Brake Line Extensions
- Bump Stop Extensions
- Coil Springs
- Sway Bar Links
IMPORTANT NOTES
- 2012-18 models using the stock front driveshaft require exhaust extension kit J5305 listed in the accessories.
- Stock Control Arms? Alignment cam locks will add 2 degrees of caster when used on stock length control arms, which will better align your wheels.
- Wheels / Tires: Factory wheels cannot be reinstalled with lift kit due to rear sway bar interference. Follow recommended wheel/tire specifications for proper clearance.
- Will work on Rubicon models.
INSTALLATION
InstructionsClick Here for Installation Guide
Specifications
Install Time Hours | 4.5 hrs |
Difficulty Level | 2 out of 5 |
(1: Easiest 5: Most Difficult)
FITMENT
- 2007 Jeep Wrangler JK 4WD 2DR
- 2008 Jeep Wrangler JK 4WD 2DR
- 2009 Jeep Wrangler JK 4WD 2DR
- 2010 Jeep Wrangler JK 4WD 2DR
- 2011 Jeep Wrangler JK 2DR
Get the look and the performance you want for your Jeep. This 3" Lift Kit for your 2 Door 2007 - 2011 Jeep Wrangler (JK) will clear 35" tires and includes heavy-duty coil spacers that offer a dramatic improvement in both ground clearance and wheel travel.
**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**
QUICK SPECS
Front Lift Height | 3" |
Rear Lift Height | 3" |
Front Lift Method | Coil Springs |
Rear Lift Method | Coil Springs |
Lift Type | Lift Kit |
Wheel Size | 16 x 8 |
Back Spacing | 4.5" |
Max Tire Size | 35 x 12.5 |
Wheel Size 2 | 17 x 9 |
Back Spacing 2 | 4.5" |
Max Tire Size 2 | 35 x 12.5 |
Wheel Size 3 | 18 x 9 |
Back Spacing 3 | 4.5" |
Max Tire Size 3 | 35 x 12.5 |
Is Adjustable | No |
Metal Cutting Required | No |
Accommodates Factory Wheels | No |
Welding Required | No |
FEATURES
- Brake line relocation brackets increase wheel travel and allow use of factory brake lines.
- Bump stop extensions properly limit up-travel, protecting your vehicle.
- Full length replacement coil springs add additional ride height while maintaining ride quality.
- Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll.
- Rear track bar bracket correctly positions rear axle under vehicle.
IN THE BOX
- All Necessary Mounting / Installation Hardware
- Brake Line Extensions
- Bump Stop Extensions
- Coil Springs
- Sway Bar Links
IMPORTANT NOTES
- 2012-18 models using the stock front driveshaft require exhaust extension kit J5305 listed in the accessories.
- Stock Control Arms? Alignment cam locks will add 2 degrees of caster when used on stock length control arms, which will better align your wheels.
- Wheels / Tires: Factory wheels cannot be reinstalled with lift kit due to rear sway bar interference. Follow recommended wheel/tire specifications for proper clearance.
- Will work on Rubicon models.
INSTALLATION
InstructionsClick Here for Installation Guide
Specifications
Install Time Hours | 4.5 hrs |
Difficulty Level | 2 out of 5 |
(1: Easiest 5: Most Difficult)
FITMENT
- 2007 Jeep Wrangler JK 4WD 2DR
- 2008 Jeep Wrangler JK 4WD 2DR
- 2009 Jeep Wrangler JK 4WD 2DR
- 2010 Jeep Wrangler JK 4WD 2DR
- 2011 Jeep Wrangler JK 2DR
To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.
Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.
Shipping
Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.
Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.
Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.
How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.
What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Manufacturer | Estimated Lead Time |
BDS Suspension | 1-2 Days |
Morimoto | 1-2 Days |
ReadyLIFT Suspensions | 1-7 Days |
Rough Country | 1-2 Days |
Zone Offroad | 1-2 Days |