Zone Offroad 4.5" Radius Arm Lift Kit (2013-2018 RAM 3500 4WD Diesel) (ZOND136 / ZOND54)
-
FREE SHIPPING ($100+)
-
30 DAY RETURNS
-
LIVE SUPPORT
IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.
Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.
QUICK SPECS
Front Lift Height | 4.5" |
Rear Lift Height | 3" |
Material | Steel |
Front Lift Method | Radius Arms |
Rear Lift Method | Coil Springs |
Lift Type | Lift Kit |
Wheel Size | 17 x 9 |
Back Spacing | 4.5" |
Max Tire Size | 35 x 12.5 |
Wheel Size 2 | 18 x 9 |
Back Spacing 2 | 5.75" |
Max Tire Size 2 | 37 x 12.5 |
Wheel Size 3 | 20 x 9 |
Back Spacing 3 | 5.75" |
Max Tire Size 3 | 37 x 12.5 |
Finish | Powdercoat |
Metal Cutting Required | No |
Accommodates Factory Wheels | See Notes |
Welding Required | No |
FEATURES
- Progressive rate front coil springs improve ride quality and offroad performance
- HD radius arm to correct caster while maximizing ground clearance
- Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle
- Bump stop relocation, sway bar relocation and brake line relocation to maintain factory-like operating angles
- Replacement rear lift blocks and u-bolts to lift and level the stance
IN THE BOX
- All Necessary Mounting / Installation Hardware
- Bump Stops
- Coil Springs
- Dropped Pitman Arm
- Rear Lift Block & U-Bolt Kit
- Sway Bar Relocation Brackets
- Track Bar Relocation Bracket
- Radius Arms
IMPORTANT NOTES
-
Although very rare, front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Optional t-case indexing ring kit recommended to reduce front driveline angle. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
- Fitment: Does NOT work for models with factory rear airbag suspension.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
INSTALLATION
InstructionsClick Here for Installation Guide 1
Click Here for Installation Guide 2
Specifications
Install Time Hours | 6 hrs |
Difficulty Level | 3 out of 5 |
(1: Easiest 5: Most Difficult)
FITMENT
- 2013 Ram 3500 4WD Diesel
- 2014 Ram 3500 4WD Diesel
- 2015 Ram 3500 4WD Diesel
- 2016 Ram 3500 4WD Diesel
- 2017 Ram 3500 4WD Diesel
- 2018 Ram 3500 4WD Diesel
IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.
Take your RAM 3500 to new heights with this 4.5" lift kit from Zone Offroad. Kits include everything needed from full length coil springs and stout radius arms to steering correction and rear lift to level the stance. Get the look, performance, and capability your truck deserves with clearance for up to 37" tires.
QUICK SPECS
Front Lift Height | 4.5" |
Rear Lift Height | 3" |
Material | Steel |
Front Lift Method | Radius Arms |
Rear Lift Method | Coil Springs |
Lift Type | Lift Kit |
Wheel Size | 17 x 9 |
Back Spacing | 4.5" |
Max Tire Size | 35 x 12.5 |
Wheel Size 2 | 18 x 9 |
Back Spacing 2 | 5.75" |
Max Tire Size 2 | 37 x 12.5 |
Wheel Size 3 | 20 x 9 |
Back Spacing 3 | 5.75" |
Max Tire Size 3 | 37 x 12.5 |
Finish | Powdercoat |
Metal Cutting Required | No |
Accommodates Factory Wheels | See Notes |
Welding Required | No |
FEATURES
- Progressive rate front coil springs improve ride quality and offroad performance
- HD radius arm to correct caster while maximizing ground clearance
- Forged pitman arm and track bar relocation bracket to correct steering angles and recenter front axle
- Bump stop relocation, sway bar relocation and brake line relocation to maintain factory-like operating angles
- Replacement rear lift blocks and u-bolts to lift and level the stance
IN THE BOX
- All Necessary Mounting / Installation Hardware
- Bump Stops
- Coil Springs
- Dropped Pitman Arm
- Rear Lift Block & U-Bolt Kit
- Sway Bar Relocation Brackets
- Track Bar Relocation Bracket
- Radius Arms
IMPORTANT NOTES
-
Although very rare, front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Optional t-case indexing ring kit recommended to reduce front driveline angle. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
- Fitment: Does NOT work for models with factory rear airbag suspension.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
INSTALLATION
InstructionsClick Here for Installation Guide 1
Click Here for Installation Guide 2
Specifications
Install Time Hours | 6 hrs |
Difficulty Level | 3 out of 5 |
(1: Easiest 5: Most Difficult)
FITMENT
- 2013 Ram 3500 4WD Diesel
- 2014 Ram 3500 4WD Diesel
- 2015 Ram 3500 4WD Diesel
- 2016 Ram 3500 4WD Diesel
- 2017 Ram 3500 4WD Diesel
- 2018 Ram 3500 4WD Diesel
To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.
Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.
Shipping
Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.
Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.
Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.
How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.
What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Manufacturer | Estimated Lead Time |
BDS Suspension | 1-2 Days |
Morimoto | 1-2 Days |
ReadyLIFT Suspensions | 1-7 Days |
Rough Country | 1-2 Days |
Zone Offroad | 1-2 Days |