Zone Offroad 4.5" Radius Arm Lift Kit (2019-2021 RAM 2500 4WD Diesel) (ZOND78)
-
FREE SHIPPING ($100+)
-
30 DAY RETURNS
-
LIVE SUPPORT
Up front, a pair of progressive rate, diesel-specific, 4.5" coil springs provides the extra height and smooth handling in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles, while a pair of sway bar drop brackets reposition the stock sway bar for optimal performance. Polyurethane bump stops limit up-travel, while brake line relocation brackets will allow your suspension to easily reach "full droop". To correct the front suspension geometry at the new height, a pair of heavy-duty replacement radius arms is provided that bolt directly into the factory location. These new arms are massive upgrade to the factory stamped units, built from 1/4" American made steel, and internally gusseted with a lower cam adjustment to dial in front end caster. A heavy-duty replacement transmission crossmember as well as a transfer case indexing ring repositions the front driveline output to allow use of the factory drivelines by correcting angles and allowing you to maintain use of 4WD. In the rear, 2.5" heavy-duty coil spacers are supplied to level out the stance and allow you to retain factory ride quality without effecting tow capacity. Extended rear sway bar end links and new bump stops are included to compensate for the lift, and a track bar bracket re-centers the rear axle.
**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**
QUICK SPECS
Front Lift Height | 4.5" |
Rear Lift Height | 2.5" |
Material | Steel |
Front Lift Method | Strut Spacers |
Rear Lift Method | Coil Springs |
Lift Type | Lift Kit |
Wheel Size | 20 x 9 |
Back Spacing | 4.5" |
Max Tire Size | 35 x 12.5 |
Wheel Size 2 | 20 x 9 |
Back Spacing 2 | 5.5" |
Max Tire Size 2 | 37 x 12.5 |
Finish | Powdercoat |
Metal Cutting Required | Yes |
Accommodates Factory Wheels | Yes |
FEATURES
- Heavy duty 1/4" steel, laser cut, internally gusseted radius arms improve strength, offer more ground clearance and correct caster
- High strength progressive rate front coil springs for a great ride on any terrain
- F/R HD track bar relocation brackets to correctly position both axles under the truck
- Forged drop pitman arm to corect steering angles
- F/R sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles
- Nitro series gas or FOX adventure series IFP gas shocks to improved ride and offroad performance
- Allows clearance for up to 37" tires
IN THE BOX
- Coil Spring Spacers - Rear
- Coil Springs - Front
- Sway Bar Relocation Brackets
- Pitman Arm
- HD Radius Arms
- Track Bar Brackets - Front & Rear
IMPORTANT NOTES
- Will NOT fit air-ride equipped models
- Diesel models only
- Does NOT fit Vehicles with a Manual Shift Transfer Case
INSTALLATION
InstructionsClick Here for Installation Guide 1
Click Here for Installation Guide 2
Click Here for Installation Guide 3
Specifications
Install Time Hours | 7-9 |
Difficulty Level | 4 out of 5 |
(1: Easiest 5: Most Difficult)
Required Tools
- Pitman Arm Puller
FITMENT
- 2019 Ram 2500 4WD Diesel
- 2020 Ram 2500 4WD Diesel
- 2021 Ram 2500 4WD Diesel
Up front, a pair of progressive rate, diesel-specific, 4.5" coil springs provides the extra height and smooth handling in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles, while a pair of sway bar drop brackets reposition the stock sway bar for optimal performance. Polyurethane bump stops limit up-travel, while brake line relocation brackets will allow your suspension to easily reach "full droop". To correct the front suspension geometry at the new height, a pair of heavy-duty replacement radius arms is provided that bolt directly into the factory location. These new arms are massive upgrade to the factory stamped units, built from 1/4" American made steel, and internally gusseted with a lower cam adjustment to dial in front end caster. A heavy-duty replacement transmission crossmember as well as a transfer case indexing ring repositions the front driveline output to allow use of the factory drivelines by correcting angles and allowing you to maintain use of 4WD. In the rear, 2.5" heavy-duty coil spacers are supplied to level out the stance and allow you to retain factory ride quality without effecting tow capacity. Extended rear sway bar end links and new bump stops are included to compensate for the lift, and a track bar bracket re-centers the rear axle.
**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**
QUICK SPECS
Front Lift Height | 4.5" |
Rear Lift Height | 2.5" |
Material | Steel |
Front Lift Method | Strut Spacers |
Rear Lift Method | Coil Springs |
Lift Type | Lift Kit |
Wheel Size | 20 x 9 |
Back Spacing | 4.5" |
Max Tire Size | 35 x 12.5 |
Wheel Size 2 | 20 x 9 |
Back Spacing 2 | 5.5" |
Max Tire Size 2 | 37 x 12.5 |
Finish | Powdercoat |
Metal Cutting Required | Yes |
Accommodates Factory Wheels | Yes |
FEATURES
- Heavy duty 1/4" steel, laser cut, internally gusseted radius arms improve strength, offer more ground clearance and correct caster
- High strength progressive rate front coil springs for a great ride on any terrain
- F/R HD track bar relocation brackets to correctly position both axles under the truck
- Forged drop pitman arm to corect steering angles
- F/R sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles
- Nitro series gas or FOX adventure series IFP gas shocks to improved ride and offroad performance
- Allows clearance for up to 37" tires
IN THE BOX
- Coil Spring Spacers - Rear
- Coil Springs - Front
- Sway Bar Relocation Brackets
- Pitman Arm
- HD Radius Arms
- Track Bar Brackets - Front & Rear
IMPORTANT NOTES
- Will NOT fit air-ride equipped models
- Diesel models only
- Does NOT fit Vehicles with a Manual Shift Transfer Case
INSTALLATION
InstructionsClick Here for Installation Guide 1
Click Here for Installation Guide 2
Click Here for Installation Guide 3
Specifications
Install Time Hours | 7-9 |
Difficulty Level | 4 out of 5 |
(1: Easiest 5: Most Difficult)
Required Tools
- Pitman Arm Puller
FITMENT
- 2019 Ram 2500 4WD Diesel
- 2020 Ram 2500 4WD Diesel
- 2021 Ram 2500 4WD Diesel
To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.
Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.
Shipping
Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.
Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.
Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.
How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.
What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Manufacturer | Estimated Lead Time |
BDS Suspension | 1-2 Days |
Morimoto | 1-2 Days |
ReadyLIFT Suspensions | 1-7 Days |
Rough Country | 1-2 Days |
Zone Offroad | 1-2 Days |