Zone Offroad 6.5" Lift Kit (2014-2018 Chevy/GMC 1500 2WD) (ZONC61 / ZONC62) Zone Offroad 6.5" Lift Kit (2014-2018 Chevy/GMC 1500 2WD) (ZONC61 / ZONC62) Zone Offroad Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers, skid plates and steering knuckles to Nitro series gas struts for improved performance with a lifted and leveled out stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires. **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE** QUICK SPECS Front Lift Height 6.5" Rear Lift Height 5" Material Steel Front Lift Method Replacement Strut Rear Lift Method Cast Blocks Lift Type Lift Kit Wheel Size 20 x 9 Back Spacing 5-5.75" Max Tire Size 35 x 12.5 Wheel Size 2 18 x 9 Back Spacing 2 5"-5.25" Max Tire Size 2 35 x 12.5 Wheel Size 3 17 x 9 Back Spacing 3 5" Max Tire Size 3 35 x 12.5 Finish Powdercoat Metal Cutting Required Yes Accommodates Factory Wheels See Notes Welding Required Yes FEATURES Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.FMVSS No.126 compliant to work with your vehicle's stability & traction control systems without lighting up your dash like a Christmas tree.High-strength, 1/4" steel construction crossmembers and ductile iron steering knuckles to optimize operating angles.Nitro series full length gas struts improve ride quality and offroad damping.Multi-point differential relocation brackets and heavy duty skid plate improve CV operating angles and offer added protectionKits are proudly made in the USA. IMPORTANT NOTES Will NOT fit models equipped with MagneRide magnetic ride control. All wheel drive models may require front CV driveshaft. See installation instructions for more information. Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2018. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum. Is your truck a crew cab? Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference. Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing. Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing. INSTALLATION Instructions Click Here for Installation Guide Specifications Install Time Hours 8 hrs  Difficulty Level 4 out of 5 (1: Easiest 5: Most Difficult) Required Tools Welding Equipment FITMENT 2014 Chevrolet Silverado 1500 RWD 2014 GMC Sierra 1500 RWD 2015 Chevrolet Silverado 1500 RWD 2015 GMC Sierra 1500 RWD 2016 Chevrolet Silverado 1500 RWD 2016 GMC Sierra 1500 RWD 2017 Chevrolet Silverado 1500 RWD 2017 GMC Sierra 1500 RWD 2018 Chevrolet Silverado 1500 RWD 2018 GMC Sierra 1500 RWD

Zone Offroad 6.5" Lift Kit (2014-2018 Chevy/GMC 1500 2WD) (ZONC61 / ZONC62)

Code: ZONC61
$1,237.34
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers, skid plates and steering knuckles to Nitro series gas struts for improved performance with a lifted and leveled out stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires.

**READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


QUICK SPECS

Front Lift Height 6.5"
Rear Lift Height 5"
Material Steel
Front Lift Method Replacement Strut
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 20 x 9
Back Spacing 5-5.75"
Max Tire Size 35 x 12.5
Wheel Size 2 18 x 9
Back Spacing 2 5"-5.25"
Max Tire Size 2 35 x 12.5
Wheel Size 3 17 x 9
Back Spacing 3 5"
Max Tire Size 3 35 x 12.5
Finish Powdercoat
Metal Cutting Required Yes
Accommodates Factory Wheels See Notes
Welding Required Yes

FEATURES

  • Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
    FMVSS
  • No.126 compliant to work with your vehicle's stability & traction
  • control systems without lighting up your dash like a Christmas tree.
    High-strength, 1/4" steel construction crossmembers and ductile iron steering knuckles to optimize operating angles.
    Nitro series full length gas struts improve ride quality and offroad damping.
    Multi-point differential relocation brackets and heavy duty skid plate improve CV operating angles and offer added protection
    Kits are proudly made in the USA.

    IMPORTANT NOTES

    • Will NOT fit models equipped with MagneRide magnetic ride control.
    • All wheel drive models may require front CV driveshaft. See installation instructions for more information.
    • Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2018. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum.
    • Is your truck a crew cab? Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance.
    • Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference.
    • Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing.
    • Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing.

      INSTALLATION

      Instructions

      Click Here for Installation Guide

      Specifications

      Install Time Hours 8 hrs
       Difficulty Level 4 out of 5

      (1: Easiest 5: Most Difficult)

      Required Tools

      • Welding Equipment

        FITMENT

        • 2014 Chevrolet Silverado 1500 RWD
        • 2014 GMC Sierra 1500 RWD
        • 2015 Chevrolet Silverado 1500 RWD
        • 2015 GMC Sierra 1500 RWD
        • 2016 Chevrolet Silverado 1500 RWD
        • 2016 GMC Sierra 1500 RWD
        • 2017 Chevrolet Silverado 1500 RWD
        • 2017 GMC Sierra 1500 RWD
        • 2018 Chevrolet Silverado 1500 RWD
        • 2018 GMC Sierra 1500 RWD

        Take your Silverado/Sierra 1500 to new heights with this 6.5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers, skid plates and steering knuckles to Nitro series gas struts for improved performance with a lifted and leveled out stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires.

        **READ IMPORTANT NOTES AND FITMENT SECTIONS BELOW PRIOR TO MAKING PURCHASE**


        QUICK SPECS

        Front Lift Height 6.5"
        Rear Lift Height 5"
        Material Steel
        Front Lift Method Replacement Strut
        Rear Lift Method Cast Blocks
        Lift Type Lift Kit
        Wheel Size 20 x 9
        Back Spacing 5-5.75"
        Max Tire Size 35 x 12.5
        Wheel Size 2 18 x 9
        Back Spacing 2 5"-5.25"
        Max Tire Size 2 35 x 12.5
        Wheel Size 3 17 x 9
        Back Spacing 3 5"
        Max Tire Size 3 35 x 12.5
        Finish Powdercoat
        Metal Cutting Required Yes
        Accommodates Factory Wheels See Notes
        Welding Required Yes

        FEATURES

        • Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance.
          FMVSS
        • No.126 compliant to work with your vehicle's stability & traction
        • control systems without lighting up your dash like a Christmas tree.
          High-strength, 1/4" steel construction crossmembers and ductile iron steering knuckles to optimize operating angles.
          Nitro series full length gas struts improve ride quality and offroad damping.
          Multi-point differential relocation brackets and heavy duty skid plate improve CV operating angles and offer added protection
          Kits are proudly made in the USA.

          IMPORTANT NOTES

          • Will NOT fit models equipped with MagneRide magnetic ride control.
          • All wheel drive models may require front CV driveshaft. See installation instructions for more information.
          • Check Control Arms: GM produced cast steel, stamped steel and aluminum control arms between 2014 and 2018. Use the reference image to help identify your stock control arms; cast steel will be replaced with cast steel, stamped steel and aluminum control arms will be replaced with aluminum.
          • Is your truck a crew cab? Add an Add-A-Leaf to your kit to offset the increased weight of the cab for a more level stance.
          • Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference.
          • Use a 1/4" wheel spacer to accommodate factory 20" wheels; refer to the provided "Max Tire Size" for 20" wheels for tire sizing.
          • Wheels / Tires: For optimal tire clearance and reduce the need for trimming, use 20x9 wheels with 5.75" backspacing.

            INSTALLATION

            Instructions

            Click Here for Installation Guide

            Specifications

            Install Time Hours 8 hrs
             Difficulty Level 4 out of 5

            (1: Easiest 5: Most Difficult)

            Required Tools

            • Welding Equipment

              FITMENT

              • 2014 Chevrolet Silverado 1500 RWD
              • 2014 GMC Sierra 1500 RWD
              • 2015 Chevrolet Silverado 1500 RWD
              • 2015 GMC Sierra 1500 RWD
              • 2016 Chevrolet Silverado 1500 RWD
              • 2016 GMC Sierra 1500 RWD
              • 2017 Chevrolet Silverado 1500 RWD
              • 2017 GMC Sierra 1500 RWD
              • 2018 Chevrolet Silverado 1500 RWD
              • 2018 GMC Sierra 1500 RWD

              IMPORTANT COVID-19 NOTE: 
              Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
               
              If an item is unexpectedly out of stock or delayed, Lift Kits 4 Vets will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
               
              Product Availability

              To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

              Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

              Shipping

              Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

              Returns & Refunds

              Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

              Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

              Product Data
              Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
               
              Markdown & Open Box Items
              Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

              F.A.Q.
              How do I request a return?
              Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
              Note: Some items must be returned directly to the manufacturer. Please do not ship items to  Lift Kits 4 Vets prior to return authorization and return instructions.

              How do I request a replacement for a missing or damaged part?
              Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
              Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

              What product warranties does Lift Kits 4 Vets offer?
              Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,  Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
              Estimated order processing times for in-stock items.
              To check stock levels, use our Live-Chat feature or Contact page.
               
               Manufacturer Estimated Lead Time
              BDS Suspension
              1-2 Days
              Morimoto 1-2 Days
              ReadyLIFT Suspensions 1-7 Days
              Rough Country 1-2 Days
              Zone Offroad 1-2 Days