BDS 2" Snap Ring Coilover Lift Kit System (2014-2018 Chevy/GMC 1500 2WD/4WD) (757FSR) BDS 2" Snap Ring Coilover Lift Kit System (2014-2018 Chevy/GMC 1500 2WD/4WD) (757FSR) BDS Suspension 2" Coilover Lift Kit Systems for the Chevy/GMC 1500 Trucks These 2" FOX 2.0 IFP strut systems are designed to build on the stout factory front suspension design on the Chevy/GMC 1500 trucks for improved performance on and off-road. More that just a "leveling kit", at the heart of these 2" system is a pair of specially tuned FOX 2.0 Performance Series IFP struts. These non-reservoir struts are designed to be used with the factory spring/top plate and offer the option to adjust front ride height based on the snap ring grooves f to level the stance. WIth the factory spring and strut top plate swapped over these are a direct bolt-in replacement for the factory assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation. Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance. Important Kit Notes 1. Strut compressor required for Installation2. Will NOT fit MagneRide magnetic ride control equipped models3. Snap ring strut kits will reuse factory top mounting hardware AND coil spring4. 33x12.50 tires will require weld on steering stop, also it requires inner fender well modification to clear this width tire Specifications Lift HeightFront (base kit): 2" CoiloverRear (base kit): Tire and Wheel Combinations 285/70r20 w/20" and Stock back spacing285/70r17 w/17x9 and 4.5" back spacing33x12.50 w/20x9 and 4.5" back spacing*Trimming may be required*   Installation Est. Installation: 3-4 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsClick Here for PDF 1 of 2Click Here for PDF 2 of 2   Vehicle Fitment Data Make Model Type Year Range Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2014-2018 Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2014-2018 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 121151 07-18 Chevy 1500 UCA Kit -Cast Steel UCA (2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1 (2) 98562002 14-18 GM 1500, Front C/O, Snap Ring, PS,

BDS 2" Snap Ring Coilover Lift Kit System (2014-2018 Chevy/GMC 1500 2WD/4WD) (757FSR)

Code: 757FSR
$1,903.85
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

2" Coilover Lift Kit Systems for the Chevy/GMC 1500 Trucks

These 2" FOX 2.0 IFP strut systems are designed to build on the stout factory front suspension design on the Chevy/GMC 1500 trucks for improved performance on and off-road.

More that just a "leveling kit", at the heart of these 2" system is a pair of specially tuned FOX 2.0 Performance Series IFP struts. These non-reservoir struts are designed to be used with the factory spring/top plate and offer the option to adjust front ride height based on the snap ring grooves f to level the stance. WIth the factory spring and strut top plate swapped over these are a direct bolt-in replacement for the factory assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation. Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance.

Important Kit Notes

1. Strut compressor required for Installation
2. Will NOT fit MagneRide magnetic ride control equipped models
3. Snap ring strut kits will reuse factory top mounting hardware AND coil spring
4. 33x12.50 tires will require weld on steering stop, also it requires inner fender well modification to clear this width tire

Specifications

Lift Height
Front (base kit): 2" Coilover
Rear (base kit):

Tire and Wheel Combinations
285/70r20 w/20" and Stock back spacing
285/70r17 w/17x9 and 4.5" back spacing
33x12.50 w/20x9 and 4.5" back spacing
*Trimming may be required*

 

Installation

Est. Installation: 3-4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

 

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2014-2018
Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2014-2018

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 121151 07-18 Chevy 1500 UCA Kit -Cast Steel UCA
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1
(2) 98562002 14-18 GM 1500, Front C/O, Snap Ring, PS,

2" Coilover Lift Kit Systems for the Chevy/GMC 1500 Trucks

These 2" FOX 2.0 IFP strut systems are designed to build on the stout factory front suspension design on the Chevy/GMC 1500 trucks for improved performance on and off-road.

More that just a "leveling kit", at the heart of these 2" system is a pair of specially tuned FOX 2.0 Performance Series IFP struts. These non-reservoir struts are designed to be used with the factory spring/top plate and offer the option to adjust front ride height based on the snap ring grooves f to level the stance. WIth the factory spring and strut top plate swapped over these are a direct bolt-in replacement for the factory assemblies and improve damper performance featuring a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOX's proprietary internals, 5/8" hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation. Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. A pair of FOX 2.0 performance series IFP shocks are supplied to match the front performance.

Important Kit Notes

1. Strut compressor required for Installation
2. Will NOT fit MagneRide magnetic ride control equipped models
3. Snap ring strut kits will reuse factory top mounting hardware AND coil spring
4. 33x12.50 tires will require weld on steering stop, also it requires inner fender well modification to clear this width tire

Specifications

Lift Height
Front (base kit): 2" Coilover
Rear (base kit):

Tire and Wheel Combinations
285/70r20 w/20" and Stock back spacing
285/70r17 w/17x9 and 4.5" back spacing
33x12.50 w/20x9 and 4.5" back spacing
*Trimming may be required*

 

Installation

Est. Installation: 3-4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

 

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2014-2018
Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2014-2018

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 121151 07-18 Chevy 1500 UCA Kit -Cast Steel UCA
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1
(2) 98562002 14-18 GM 1500, Front C/O, Snap Ring, PS,

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed, Lift Kits 4 Vets will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to  Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,  Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days