BDS 4" Performance Elite Coilover Lift Kit (2019-2022 Chevy/GMC 1500 Trail Boss/AT4 4WD Gas) (1805FPE) BDS 4" Performance Elite Coilover Lift Kit (2019-2022 Chevy/GMC 1500 Trail Boss/AT4 4WD Gas) (1805FPE) BDS Suspension IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.High Clearance Coilover Systems for Chevy/GMC 1500 Trail Boss/AT4 trucks featuring FOX Performance Elite shocks These PE coilover systems join the current lineup offering improved performance and capability. These kits are based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, designed from the ground up to get the more out of your truck with the most ground clearance on the market. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality. Case in point the (NHTSA) National Highway Traffic Safety Administration's FMVSS No.126 compliance standards requiring any aftermarket modification to not adversely effect the vehicle's electronic stability control (ESC) system performance in the event of an evasive maneuver. At the heart of these systems are a pair of precision tuned FOX 2.5 performance elite series coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless aluminum body for better heat dispersion, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs. Complimenting the coilovers, BDS utilizes a pair of specially designed 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength. In the rear of this performance lift kit, the factory block is replaced with a tall lift block and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Rear damper capacity is improved by your choice of specially tuned FOX 2.0 IFP Performance Series gas shocks or upgrade to the FOX 2.5 Performance Elite Series shocks with remote DSC reservoir to match the front performance. All kits come finished in a durable textured black powder coat and sent with all hardware packs to complete the install along with step-by-step installation instructions. If you're looking to optimize performance and capability this 4" coilover system is for you. While these kits net 4" of lift on a Trail Boss/AT4, ride height is similar to a 6" lift on a standard GM1500 truck. Building on the tried-and-true BDS high clearance design these kits maintain on-road handling and performance while upping the ante with FOX 2.5 factory race series remote reservoir coilovers for truly next level performance on any terrain. These coilovers are available in standard or DSC (dual speed compression) adjustable versions and pair with a set of FOX 2.0 IFP performance series rear shocks. Additionally high strength 1/4" steel crossmembers, precision machined ductile iron steering knuckles, heavy duty tie rod ends, multipoint differential drop brackets, front and differential skid plates, performance series upper control arms, sway bar relocation, rear block kit and brake line relocation brackets come together to form a quality systems designed to enhance your late model GM truck with clearance for 35- 37" tires. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Will NOT fit Adaptive Ride Control (ARC) equipped models2. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.3. 17" wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.4. Front skid plate will not work with 2.7L Turbo Engines. Specifications Lift HeightFront (base kit): 2.5" Fox 2.5" CoiloverRear (base kit): 1" Block and U-Bolt Tire and Wheel Combinations 37x12.50 w/20x9/22x9(Chevy) and 5.5" back spacing35x12.50 w/20x9/22x9(GMC) and 5.5-6.25" back spacing34"x12.50 w/17x8/17x9/18x9 and 4.5" back spacing*Trimming may be required* Installation Est. Installation: 8 hoursDifficulty Level (easy 1 - 5 complicated): 4 InstructionsClick Here for PDF Vehicle Fitment Data Make Model Type Lift Year Range Chevy / GMC 1/2 Ton Truck 4WD Trail Boss / AT4 6" 2019-2022 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 011518 2019-2022 Chevy/GMC 1500 5in Rear Box Ki (1) 021664 2019-2022 Chevy/GMC 1500 Knuckle Box 1of (1) 021665 2019-2022 Chevy/GMC 1500 Knuckle Box 2of (1) 021682 2019-2022 Chevy/GMC 1500 6in Front Box K (1) 021683 2019-2022 GM 1500 6in Front Box Kit 2of2 (1) 121633 2019-2022 Chevy/GMC 1500 Coilover Reserv (1) 88406323 2019-21 GM 1500, 2.5 Perf. Elite Series, (2) 98224759 Fox 2.0 Shox 29.8 x 12.6 x 2 -EB1-EB1

BDS 4" Performance Elite Coilover Lift Kit (2019-2022 Chevy/GMC 1500 Trail Boss/AT4 4WD Gas) (1805FPE)

Code: 1805FPE
$4,759.37
In Stock
  • FREE SHIPPING ($100+)

  • 30 DAY RETURNS

  • LIVE SUPPORT

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


High Clearance Coilover Systems for Chevy/GMC 1500 Trail Boss/AT4 trucks featuring FOX Performance Elite shocks

These PE coilover systems join the current lineup offering improved performance and capability. These kits are based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, designed from the ground up to get the more out of your truck with the most ground clearance on the market. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality. Case in point the (NHTSA) National Highway Traffic Safety Administration's FMVSS No.126 compliance standards requiring any aftermarket modification to not adversely effect the vehicle's electronic stability control (ESC) system performance in the event of an evasive maneuver.

At the heart of these systems are a pair of precision tuned FOX 2.5 performance elite series coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless aluminum body for better heat dispersion, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs. Complimenting the coilovers, BDS utilizes a pair of specially designed 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of this performance lift kit, the factory block is replaced with a tall lift block and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Rear damper capacity is improved by your choice of specially tuned FOX 2.0 IFP Performance Series gas shocks or upgrade to the FOX 2.5 Performance Elite Series shocks with remote DSC reservoir to match the front performance. All kits come finished in a durable textured black powder coat and sent with all hardware packs to complete the install along with step-by-step installation instructions.

If you're looking to optimize performance and capability this 4" coilover system is for you. While these kits net 4" of lift on a Trail Boss/AT4, ride height is similar to a 6" lift on a standard GM1500 truck. Building on the tried-and-true BDS high clearance design these kits maintain on-road handling and performance while upping the ante with FOX 2.5 factory race series remote reservoir coilovers for truly next level performance on any terrain. These coilovers are available in standard or DSC (dual speed compression) adjustable versions and pair with a set of FOX 2.0 IFP performance series rear shocks. Additionally high strength 1/4" steel crossmembers, precision machined ductile iron steering knuckles, heavy duty tie rod ends, multipoint differential drop brackets, front and differential skid plates, performance series upper control arms, sway bar relocation, rear block kit and brake line relocation brackets come together to form a quality systems designed to enhance your late model GM truck with clearance for 35- 37" tires.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Will NOT fit Adaptive Ride Control (ARC) equipped models
2. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
3. 17" wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.
4. Front skid plate will not work with 2.7L Turbo Engines.

Specifications

Lift Height
Front (base kit): 2.5" Fox 2.5" Coilover
Rear (base kit): 1" Block and U-Bolt

Tire and Wheel Combinations

37x12.50 w/20x9/22x9(Chevy) and 5.5" back spacing
35x12.50 w/20x9/22x9(GMC) and 5.5-6.25" back spacing
34"x12.50 w/17x8/17x9/18x9 and 4.5" back spacing
*Trimming may be required*


Installation

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 4
Instructions
Click Here for PDF

Vehicle Fitment Data

Make Model Type Lift Year Range
Chevy / GMC 1/2 Ton Truck 4WD Trail Boss / AT4 6" 2019-2022

Base Kit Components

These components are subject to change based upon your selections.
Qty Part# Description
(1) 011518 2019-2022 Chevy/GMC 1500 5in Rear Box Ki
(1) 021664 2019-2022 Chevy/GMC 1500 Knuckle Box 1of
(1) 021665 2019-2022 Chevy/GMC 1500 Knuckle Box 2of
(1) 021682 2019-2022 Chevy/GMC 1500 6in Front Box K
(1) 021683 2019-2022 GM 1500 6in Front Box Kit 2of2
(1) 121633 2019-2022 Chevy/GMC 1500 Coilover Reserv
(1) 88406323 2019-21 GM 1500, 2.5 Perf. Elite Series,
(2) 98224759 Fox 2.0 Shox 29.8 x 12.6 x 2 -EB1-EB1

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


High Clearance Coilover Systems for Chevy/GMC 1500 Trail Boss/AT4 trucks featuring FOX Performance Elite shocks

These PE coilover systems join the current lineup offering improved performance and capability. These kits are based around the tried and true high clearance technology that has made BDS the go to for GM suspension lifts, designed from the ground up to get the more out of your truck with the most ground clearance on the market. While some companies build "kits" to fit larger tires, BDS Suspension prides itself in engineering complete suspension systems designed to take your vehicle's performance to the next level while retaining OE-level functionality. Case in point the (NHTSA) National Highway Traffic Safety Administration's FMVSS No.126 compliance standards requiring any aftermarket modification to not adversely effect the vehicle's electronic stability control (ESC) system performance in the event of an evasive maneuver.

At the heart of these systems are a pair of precision tuned FOX 2.5 performance elite series coilovers engineered to outperform on and offroad as they soak up the terrain. These coilovers are preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless aluminum body for better heat dispersion, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs optional DSC (dual speed compression) adjustment technology built in. DSC allows for easy adjustment of the vehicle's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the knobs located on the end of the reservoir. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail. A pair of reservoir mounting brackets are supplied to position the reservoirs. Complimenting the coilovers, BDS utilizes a pair of specially designed 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Rounding out the front of this kit are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength.

In the rear of this performance lift kit, the factory block is replaced with a tall lift block and longer u-bolts to lift and level the stance. Also included, BDS supplies brake line and ABS line brackets allow the use of factory brake lines. Rear damper capacity is improved by your choice of specially tuned FOX 2.0 IFP Performance Series gas shocks or upgrade to the FOX 2.5 Performance Elite Series shocks with remote DSC reservoir to match the front performance. All kits come finished in a durable textured black powder coat and sent with all hardware packs to complete the install along with step-by-step installation instructions.

If you're looking to optimize performance and capability this 4" coilover system is for you. While these kits net 4" of lift on a Trail Boss/AT4, ride height is similar to a 6" lift on a standard GM1500 truck. Building on the tried-and-true BDS high clearance design these kits maintain on-road handling and performance while upping the ante with FOX 2.5 factory race series remote reservoir coilovers for truly next level performance on any terrain. These coilovers are available in standard or DSC (dual speed compression) adjustable versions and pair with a set of FOX 2.0 IFP performance series rear shocks. Additionally high strength 1/4" steel crossmembers, precision machined ductile iron steering knuckles, heavy duty tie rod ends, multipoint differential drop brackets, front and differential skid plates, performance series upper control arms, sway bar relocation, rear block kit and brake line relocation brackets come together to form a quality systems designed to enhance your late model GM truck with clearance for 35- 37" tires.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Will NOT fit Adaptive Ride Control (ARC) equipped models
2. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
3. 17" wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.
4. Front skid plate will not work with 2.7L Turbo Engines.

Specifications

Lift Height
Front (base kit): 2.5" Fox 2.5" Coilover
Rear (base kit): 1" Block and U-Bolt

Tire and Wheel Combinations

37x12.50 w/20x9/22x9(Chevy) and 5.5" back spacing
35x12.50 w/20x9/22x9(GMC) and 5.5-6.25" back spacing
34"x12.50 w/17x8/17x9/18x9 and 4.5" back spacing
*Trimming may be required*


Installation

Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 4
Instructions
Click Here for PDF

Vehicle Fitment Data

Make Model Type Lift Year Range
Chevy / GMC 1/2 Ton Truck 4WD Trail Boss / AT4 6" 2019-2022

Base Kit Components

These components are subject to change based upon your selections.
Qty Part# Description
(1) 011518 2019-2022 Chevy/GMC 1500 5in Rear Box Ki
(1) 021664 2019-2022 Chevy/GMC 1500 Knuckle Box 1of
(1) 021665 2019-2022 Chevy/GMC 1500 Knuckle Box 2of
(1) 021682 2019-2022 Chevy/GMC 1500 6in Front Box K
(1) 021683 2019-2022 GM 1500 6in Front Box Kit 2of2
(1) 121633 2019-2022 Chevy/GMC 1500 Coilover Reserv
(1) 88406323 2019-21 GM 1500, 2.5 Perf. Elite Series,
(2) 98224759 Fox 2.0 Shox 29.8 x 12.6 x 2 -EB1-EB1

Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is."Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days