BDS 4" Radius Arm Lift Kit (2014-2018 Ram 2500 4WD Diesel w/ Rear Coil Springs) (1762H) BDS 4" Radius Arm Lift Kit (2014-2018 Ram 2500 4WD Diesel w/ Rear Coil Springs) (1762H) BDS Suspension DIESEL MODELS ONLY. BDS takes the RAM 2500 4WD Trucks to the next level with this 4" Radius Arm Suspension Systems. Designed to improve the looks and performance of your RAM 2500, these kits include everything necessary to correctly lift them for improved offroad capability while maintaining on-road handling. The 4" kits will lift and level the stance with clearance for up to 37" tires. They use a pair of full-length progressive rate coil springs to provide extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance. In the rear of the RAM 2500 kits replacement progressive rate coil springs are used to lift and level the stance along with extended length sway bar links, rear bump stop extensions, a rear track bar, and your choice of gas shocks. AirRide equipped models will use a rear air-bag spacer and rear ride height sensor brackets to retain the full functionality of the air suspension. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Not for use with factory rear airbag suspensions2. Will not fit RAM 2500 Powerwagon models.3. Will not fit Cab and Chassis models Specifications Lift Height Front (base kit): 4" Coil SpringRear (base kit): 2.5" Coil Spacers Tire and Wheel Combinations 37x12.50 w/20"x9 and 5.625" back spacing35x12.50 w/20"x9 and 4.5" back spacing*Trimming may be required* Installation Est. Installation: 6-8 hoursDifficulty Level (easy 1 - 5 complicated): 4 InstructionsClick Here for PDF 1 of 2Click Here for PDF 2 of 2 Vehicle Fitment Data Make Model Type Lift Year Range Dodge / Ram 2500 Truck 4WD w/ Rear Coil Springs 4" 2014-2018 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 012258 2.5" Rear Coil Spring Box Kit (1) 012432 2014-2018 Ram 2500 4wd 4" Radius Arm Fro (1) 032491 2019-2022 Ram 2500/3500 Coils 4in Diesel (1) 122321 2013-2022 Ram 2500 /2013-2022 Ram 3500 R (2) 85752 NX² Shock Absorber (2) 85757 NX² Shock Absorber

BDS 4" Radius Arm Lift Kit (2014-2018 Ram 2500 4WD Diesel w/ Rear Coil Springs) (1762H)

Code: 1762H
$2,040.10
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

DIESEL MODELS ONLY.

BDS takes the RAM 2500 4WD Trucks to the next level with this 4" Radius Arm Suspension Systems.

Designed to improve the looks and performance of your RAM 2500, these kits include everything necessary to correctly lift them for improved offroad capability while maintaining on-road handling. The 4" kits will lift and level the stance with clearance for up to 37" tires. They use a pair of full-length progressive rate coil springs to provide extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 2500 kits replacement progressive rate coil springs are used to lift and level the stance along with extended length sway bar links, rear bump stop extensions, a rear track bar, and your choice of gas shocks. AirRide equipped models will use a rear air-bag spacer and rear ride height sensor brackets to retain the full functionality of the air suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Not for use with factory rear airbag suspensions
2. Will not fit RAM 2500 Powerwagon models.
3. Will not fit Cab and Chassis models

Specifications

Lift Height

Front (base kit): 4" Coil Spring
Rear (base kit): 2.5" Coil Spacers

Tire and Wheel Combinations

37x12.50 w/20"x9 and 5.625" back spacing
35x12.50 w/20"x9 and 4.5" back spacing
*Trimming may be required*


Installation

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Type Lift Year Range
Dodge / Ram 2500 Truck 4WD w/ Rear Coil Springs 4" 2014-2018


Base Kit Components

These components are subject to change based upon your selections.
Qty Part# Description
(1) 012258 2.5" Rear Coil Spring Box Kit
(1) 012432 2014-2018 Ram 2500 4wd 4" Radius Arm Fro
(1) 032491 2019-2022 Ram 2500/3500 Coils 4in Diesel
(1) 122321 2013-2022 Ram 2500 /2013-2022 Ram 3500 R
(2) 85752 NX² Shock Absorber
(2) 85757 NX² Shock Absorber

DIESEL MODELS ONLY.

BDS takes the RAM 2500 4WD Trucks to the next level with this 4" Radius Arm Suspension Systems.

Designed to improve the looks and performance of your RAM 2500, these kits include everything necessary to correctly lift them for improved offroad capability while maintaining on-road handling. The 4" kits will lift and level the stance with clearance for up to 37" tires. They use a pair of full-length progressive rate coil springs to provide extra height and smooth controlled performance. A forged drop pitman arm is supplied to correct steering angles along with an HD bar drop bracket to re-center the front axle. A pair of sway bar drop brackets to reposition the OE sway bar for optimal performance along with extended polyurethane bump stops to limit up travel and brake line brackets to allow full droop. To correct the front suspension geometry at the new height a pair of heavy-duty replacement radius arms bolt directly into the factory location. These new radius arms are a massive upgrade to the factory stamped units, using tubular construction and a lower cam adjustment to dial in the front end caster. Also supplied are your choice of BDS NX2 gas shocks or FOX 2.0 performance series IFP gas shocks for improved ride and performance.

In the rear of the RAM 2500 kits replacement progressive rate coil springs are used to lift and level the stance along with extended length sway bar links, rear bump stop extensions, a rear track bar, and your choice of gas shocks. AirRide equipped models will use a rear air-bag spacer and rear ride height sensor brackets to retain the full functionality of the air suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Not for use with factory rear airbag suspensions
2. Will not fit RAM 2500 Powerwagon models.
3. Will not fit Cab and Chassis models

Specifications

Lift Height

Front (base kit): 4" Coil Spring
Rear (base kit): 2.5" Coil Spacers

Tire and Wheel Combinations

37x12.50 w/20"x9 and 5.625" back spacing
35x12.50 w/20"x9 and 4.5" back spacing
*Trimming may be required*


Installation

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Type Lift Year Range
Dodge / Ram 2500 Truck 4WD w/ Rear Coil Springs 4" 2014-2018


Base Kit Components

These components are subject to change based upon your selections.
Qty Part# Description
(1) 012258 2.5" Rear Coil Spring Box Kit
(1) 012432 2014-2018 Ram 2500 4wd 4" Radius Arm Fro
(1) 032491 2019-2022 Ram 2500/3500 Coils 4in Diesel
(1) 122321 2013-2022 Ram 2500 /2013-2022 Ram 3500 R
(2) 85752 NX² Shock Absorber
(2) 85757 NX² Shock Absorber

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed, Lift Kits 4 Vets will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to  Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,  Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days