BDS 6" Lift Kit (2013-2018 RAM 1500 Pickup 4WD Gas w/o Air-Ride) (671H)
-
FREE SHIPPING ($100+)
-
30 DAY RETURNS
-
LIVE SUPPORT
IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.
GAS MODELS ONLY.
This 6" lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.
The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
Due to the OE ride height variances, BDS allows you to customize your desired stance by offering both 3" or 5" rear Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.
Rear NX² series shock absorbers are included with BDS by Fox 2.0 series gas shocks available as an upgrade.
Note: These vehicles vary from 1" to 3" tail high from the factory. We offer both a 3" rear kit as well as a 5" rear kit. Be sure to measure your vehicle and order the appropriate rear lift height to level your truck.
Rear Lift
Important Kit Notes
1. The rack and pinion steering system is extremely sensitive to an out-of -round or out-of-balance tire/wheel combination. The larger the tire and the less the backspacing, the more sensative the system becomes, causing minor steering wheel shimmy.2. Not recommended for AWD models.
3. Stock 17" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
4. Will not fit adjustable air suspension equipped models.
5. TRX models will achieve aproximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system.
6. This kit is FMVSS No.126 Compliant.
7. This kit will bolt on Eco-Diesel models but it will require an aftermarket front drive shaft.
Specifications
Lift Height
Front (base kit): 6" High Clearance IFS System
Rear (base kit): 4" Block Kit
Tire and Wheel Combinations
37" x 12.50" w/17 x 9 and 4-1/2" back spacing
37" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Installation
Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4
Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2
Vehicle Fitment Data
Make | Model | Type | Year Range |
---|---|---|---|
Dodge / Ram | 1500 Truck 4WD | w/o Air-Ride | 2013-2018 |
Base Kit Components
These components are subject to change based upon your selections.
Qty | Part# | Description |
---|---|---|
(1) | 022309 | 09-18 Dodge 1500 3in Rear Box Kit |
(1) | 022624 | 2012 Dodge 1500 6in Frnt Box Kit 3 of 4 |
(1) | 022625 | 2012 Dodge 1500 6 in Frnt Box Kit 4 of 4 |
(1) | 022630 | 2013 DODGE 1500 4WD FRONTBOXKIT (1 OF 4) |
(1) | 022631 | 2013 DODGE 4WD FRONTBOXKIT (2 OF 4) |
(2) | 85758 | NX² Shock Absorber |
IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.
GAS MODELS ONLY.
This 6" lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.
The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.
Due to the OE ride height variances, BDS allows you to customize your desired stance by offering both 3" or 5" rear Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.
Rear NX² series shock absorbers are included with BDS by Fox 2.0 series gas shocks available as an upgrade.
Note: These vehicles vary from 1" to 3" tail high from the factory. We offer both a 3" rear kit as well as a 5" rear kit. Be sure to measure your vehicle and order the appropriate rear lift height to level your truck.
Rear Lift
Important Kit Notes
1. The rack and pinion steering system is extremely sensitive to an out-of -round or out-of-balance tire/wheel combination. The larger the tire and the less the backspacing, the more sensative the system becomes, causing minor steering wheel shimmy.2. Not recommended for AWD models.
3. Stock 17" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
4. Will not fit adjustable air suspension equipped models.
5. TRX models will achieve aproximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system.
6. This kit is FMVSS No.126 Compliant.
7. This kit will bolt on Eco-Diesel models but it will require an aftermarket front drive shaft.
Specifications
Lift Height
Front (base kit): 6" High Clearance IFS System
Rear (base kit): 4" Block Kit
Tire and Wheel Combinations
37" x 12.50" w/17 x 9 and 4-1/2" back spacing
37" x 12.50" w/18 or 20 x 9 and 5" back spacing
*Trimming may be required*
Installation
Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4
Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2
Vehicle Fitment Data
Make | Model | Type | Year Range |
---|---|---|---|
Dodge / Ram | 1500 Truck 4WD | w/o Air-Ride | 2013-2018 |
Base Kit Components
These components are subject to change based upon your selections.
Qty | Part# | Description |
---|---|---|
(1) | 022309 | 09-18 Dodge 1500 3in Rear Box Kit |
(1) | 022624 | 2012 Dodge 1500 6in Frnt Box Kit 3 of 4 |
(1) | 022625 | 2012 Dodge 1500 6 in Frnt Box Kit 4 of 4 |
(1) | 022630 | 2013 DODGE 1500 4WD FRONTBOXKIT (1 OF 4) |
(1) | 022631 | 2013 DODGE 4WD FRONTBOXKIT (2 OF 4) |
(2) | 85758 | NX² Shock Absorber |
To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.
Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.
Shipping
Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.
Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.
Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.
How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.
What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Manufacturer | Estimated Lead Time |
BDS Suspension | 1-2 Days |
Morimoto | 1-2 Days |
ReadyLIFT Suspensions | 1-7 Days |
Rough Country | 1-2 Days |
Zone Offroad | 1-2 Days |