-
FREE SHIPPING
-
30 DAY RETURNS
-
LIVE SUPPORT
DIESEL ONLY. DUALLY MODELS ONLY.
Up the ante with the BDS 6" radius arm coilover system for the Ford Super Duty.
These 6" systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. This systems take performance to the next level with FOX 2.5 factory series remote reservoir coilovers. The coilovers are pre-tuned for optimal performance and are available with optional DSC adjustment. These bolt into place using the supplied mounting brackets and pair with a set of FOX 2.0 performance series gas shocks. Additionally a forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6" of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6" lift systems are replacement rear lift blocks to level out the stance. Additionally high strength black e-coated u-bolts are supplied specific to the DRW axle along with a pair of matching FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.
Important Kit Notes
1. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final right height will be the same as standard models.2. Dually Diesel Models Only
3. Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
4. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402).
5. 38 x 13.50 tires may require minor trimming.
6. Indexing ring has not been designed to work on manual shift transfer case models.
7. Modification to the shift cable mount will be required.
Specifications
Lift Height
Front (base kit): 6" Radius Arm/Coilover
Rear (base kit): 5" Block
Tire and Wheel Combinations
38x13.50 w/20x9 and 4.5-5" back spacing
38x13.50 w/20x10 and 5" back spacing
*Trimming may be required*
Installation
Est. Installation: 6-8 hoursDifficulty Level (easy 1 - 5 complicated): 4
Instructions
Click Here for PDF 1 of 3
Click Here for PDF 2 of 3
Click Here for PDF 3 of 3
Vehicle Fitment Data
Make | Model | Year Range |
---|---|---|
Ford | F350 Super Duty DRW 4WD | 2020-2021 |
Base Kit Components
These components are subject to change based upon your selections.
Qty | Part# | Description |
---|---|---|
(1) | 013526 | 17-20 F350 Dually 5" Block Kit |
(1) | 013603 | 2020-2022 F250/F350 6in RA Front Box Sus |
(1) | 123251 | Radius Arm Box Kit |
(1) | 123605 | 2017-2022 SD T-Case Indexing Kit- DSL |
(1) | 123613 | 2017-2022 Super Duty Coil-over Mount Kit |
(1) | 85431 | NX2 Single Stabilizer (BDS Only) |
(1) | 88402127 | Kit: BDS 05-20 Ford F250/F350 Front Coil |
(2) | 98224718 | Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1 |
(2) | 98224750 | Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1 |
DIESEL ONLY. DUALLY MODELS ONLY.
Up the ante with the BDS 6" radius arm coilover system for the Ford Super Duty.
These 6" systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. This systems take performance to the next level with FOX 2.5 factory series remote reservoir coilovers. The coilovers are pre-tuned for optimal performance and are available with optional DSC adjustment. These bolt into place using the supplied mounting brackets and pair with a set of FOX 2.0 performance series gas shocks. Additionally a forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6" of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6" lift systems are replacement rear lift blocks to level out the stance. Additionally high strength black e-coated u-bolts are supplied specific to the DRW axle along with a pair of matching FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. Take your Super Duty to the next level with BDS Suspension.
Important Kit Notes
1. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final right height will be the same as standard models.2. Dually Diesel Models Only
3. Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
4. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402).
5. 38 x 13.50 tires may require minor trimming.
6. Indexing ring has not been designed to work on manual shift transfer case models.
7. Modification to the shift cable mount will be required.
Specifications
Lift Height
Front (base kit): 6" Radius Arm/Coilover
Rear (base kit): 5" Block
Tire and Wheel Combinations
38x13.50 w/20x9 and 4.5-5" back spacing
38x13.50 w/20x10 and 5" back spacing
*Trimming may be required*
Installation
Est. Installation: 6-8 hoursDifficulty Level (easy 1 - 5 complicated): 4
Instructions
Click Here for PDF 1 of 3
Click Here for PDF 2 of 3
Click Here for PDF 3 of 3
Vehicle Fitment Data
Make | Model | Year Range |
---|---|---|
Ford | F350 Super Duty DRW 4WD | 2020-2021 |
Base Kit Components
These components are subject to change based upon your selections.
Qty | Part# | Description |
---|---|---|
(1) | 013526 | 17-20 F350 Dually 5" Block Kit |
(1) | 013603 | 2020-2022 F250/F350 6in RA Front Box Sus |
(1) | 123251 | Radius Arm Box Kit |
(1) | 123605 | 2017-2022 SD T-Case Indexing Kit- DSL |
(1) | 123613 | 2017-2022 Super Duty Coil-over Mount Kit |
(1) | 85431 | NX2 Single Stabilizer (BDS Only) |
(1) | 88402127 | Kit: BDS 05-20 Ford F250/F350 Front Coil |
(2) | 98224718 | Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1 |
(2) | 98224750 | Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1 |
To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.
Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.
Shipping
Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.
Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.
Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.
How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.
What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Manufacturer | Estimated Lead Time |
BDS Suspension | 1-2 Days |
Morimoto | 1-2 Days |
ReadyLIFT Suspensions | 1-7 Days |
Rough Country | 1-2 Days |
Zone Offroad | 1-2 Days |