BDS 2" Performance Coilover Lift Kit (2019-2021 Chevy/GMC 1500 2WD/4WD) (770FDSC) BDS 2" Performance Coilover Lift Kit (2019-2021 Chevy/GMC 1500 2WD/4WD) (770FDSC) BDS Suspension When its time to step your game up these 2" FOX coilover systems are ready to do battle. More that just a "leveling kit", this 2" system steps up to specially tuned FOX 2.5 Factory Race Series coilovers featuring DSC (dual speed compression) adjustment.These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The DSC reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences.Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. You choice of FOX 2.0 Performance Series IFP shocks or FOX 2.5 Factory Race Series shocks with DSC remote reservoir are avaialble to improve rear suspension performance. Important Kit Notes 1. Requires a maximum of 5.5" BS Wheel for tire clearance to the upper ball joint when used on 2-3.5" kits2. Will not fit Denali models equipped with ARC3. Can be used on Trail Boss / AT4 models, but will net 0" lift Specifications Lift HeightFront (base kit): 2" CoiloverRear (base kit): N/A Tire and Wheel Combinations 295/70 w/17x9 and Stock back spacing295/65 w/18x9 and Stock back spacing295/60 w/20x9 and Stock back spacing*Trimming may be required* Installation Est. Installation: 3-4 hoursDifficulty Level (easy 1 - 5 complicated): 3 InstructionsClick Here for PDF 1 of 2Click Here for PDF 2 of 2 Vehicle Fitment Data Make Model Type Year Range Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2019-2021 Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2019-2021 Base Kit Components These components are subject to change based upon your selections. Qty Part# Description (1) 121253 X - 19 GM 1500 Upper Control Arm Kit (1) 88306157 Kit: 19-ON GM 1500 Front Coilover, 2.5 S (2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1 *Subject to change based upon selections

BDS 2" Performance Coilover Lift Kit (2019-2021 Chevy/GMC 1500 2WD/4WD) (770FDSC)

Code: 770FDSC
$3,708.53
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

When its time to step your game up these 2" FOX coilover systems are ready to do battle. More that just a "leveling kit", this 2" system steps up to specially tuned FOX 2.5 Factory Race Series coilovers featuring DSC (dual speed compression) adjustment.

These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The DSC reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences.

Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. You choice of FOX 2.0 Performance Series IFP shocks or FOX 2.5 Factory Race Series shocks with DSC remote reservoir are avaialble to improve rear suspension performance.

Important Kit Notes

1. Requires a maximum of 5.5" BS Wheel for tire clearance to the upper ball joint when used on 2-3.5" kits
2. Will not fit Denali models equipped with ARC
3. Can be used on Trail Boss / AT4 models, but will net 0" lift

Specifications

Lift Height
Front (base kit): 2" Coilover
Rear (base kit): N/A

Tire and Wheel Combinations
295/70 w/17x9 and Stock back spacing
295/65 w/18x9 and Stock back spacing
295/60 w/20x9 and Stock back spacing
*Trimming may be required*

Installation

Est. Installation: 3-4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2019-2021
Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 121253 X - 19 GM 1500 Upper Control Arm Kit
(1) 88306157 Kit: 19-ON GM 1500 Front Coilover, 2.5 S
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1
*Subject to change based upon selections

When its time to step your game up these 2" FOX coilover systems are ready to do battle. More that just a "leveling kit", this 2" system steps up to specially tuned FOX 2.5 Factory Race Series coilovers featuring DSC (dual speed compression) adjustment.

These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remove reservoirs with mounting brackets. The DSC reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences.

Also supplied for the front are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims. In the rear of these lift systems the factory leaf springs are retained to result in a level stance in no change in tow/load capacity. You choice of FOX 2.0 Performance Series IFP shocks or FOX 2.5 Factory Race Series shocks with DSC remote reservoir are avaialble to improve rear suspension performance.

Important Kit Notes

1. Requires a maximum of 5.5" BS Wheel for tire clearance to the upper ball joint when used on 2-3.5" kits
2. Will not fit Denali models equipped with ARC
3. Can be used on Trail Boss / AT4 models, but will net 0" lift

Specifications

Lift Height
Front (base kit): 2" Coilover
Rear (base kit): N/A

Tire and Wheel Combinations
295/70 w/17x9 and Stock back spacing
295/65 w/18x9 and Stock back spacing
295/60 w/20x9 and Stock back spacing
*Trimming may be required*

Installation

Est. Installation: 3-4 hours
Difficulty Level (easy 1 - 5 complicated): 3

Instructions
Click Here for PDF 1 of 2
Click Here for PDF 2 of 2

Vehicle Fitment Data

Make Model Type Year Range
Chevy / GMC 1/2 Ton Truck 2WD Silverado / Sierra 2019-2021
Chevy / GMC 1/2 Ton Truck 4WD Silverado / Sierra 2019-2021

Base Kit Components

These components are subject to change based upon your selections.

Qty Part# Description
(1) 121253 X - 19 GM 1500 Upper Control Arm Kit
(1) 88306157 Kit: 19-ON GM 1500 Front Coilover, 2.5 S
(2) 98224719 Fox 2.0 Shock 26.85 x 16.75 x 2- EB1/EB1
*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed, Lift Kits 4 Vets will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to  Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,  Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days