BDS Suspension 3" Lift Kit (2012-2018 Jeep Wrangler JK 2 Door 4WD - Standard Jeep or Rubicon) (1415H)

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.

BDS Suspension 3" Lift Kit for the 2012-2018 Jeep Wrangler JK 2 door 4WD - Standard Jeep or Rubicon.

Specifically intended for 2012-17 models, this system includes an exhaust extension kit that maximizes allowable wheel travel with the factory front driveshaft. This kit comes with 3" Pro-Ride Coil Springs capable of full coil bind and 2" bump stop extensions to control the compression travel, but increase wheel travel.

Brake line relocation brackets are supplied to handle the added wheel travel. Many companies don't include anything to correct your alignment, but BDS includes octo cam washers for the front lower control arms to fine tune the caster angle.
Fixed swaybar links are included for Rubicon models with the factory disconnect system, for non-Rubicon models choose between BDS Ultimate Sway Bar Disconnects or JKS Quicker Disconnects. In the rear, sway bar drop brackets are included instead of longer sway bar links to allow the use of a factory wheel and larger tire. To correct the rear axle shift from the lift, a rear frame mounted track bar relocation bracket is included.

The kit comes standard with NX2 series custom valved shock absorbers for a smooth ride. BDS carries a large selection of accessories for Jeep JK's so check out what is available for this 3" lift by customizing your system.

This system is available with NX2 series custom valved shocks or Fox 2.0 series high performance monotube gas shocks for increased control.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Removing the OE spring isolators will result in a 1" lift if desired.
2. 124408 rear track bar or 124308 rear track bar relocation is recommended if using factory wheels
3. This kit is FMVSS No.126 Compliant
4. This kit is right hand drive compatible. Follow right hand drive installation instructions when installing this kit on a right hand drive vehicle.
5. If using these rear sway bar links, the sway bar drop will not need to be installed. This also requires a wheel with 4.5" backspacing or less for tire clearance.

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Specifications

Lift Height
Front (Base Kit):3 in Coil Springs
Rear (Base Kit):3 in Coil Springs

Tire and Wheel Combinations
35x12.50 w/16x8 and 4.5" back spacing
*Trimming may be required*

Vehicle Fitment Data

Make	Model	Type	Lift	Location	Year Range
Jeep	Wrangler	JK 2 Door	3"	Front & Rear	2012-2018
Jeep	Wrangler RHD	JK 2 Door	3"	Front & Rear	2012-2018

Installation

Difficulty Level (1 easy - 5 complicated): 2
Estimated Installation Time (hours): 6

Instructions
PDF (click here)

Base Kit Components

Qty	Part#	Description
(1)	014310	Jk 3 In Box Kit
(1)	034209	JK Rear 2 In Coil Kit
(1)	034312	Jk 2 Door 3 In Front Coils
(1)	124314	12-18 Jeep JK Exhaust Extension Kit
(2)	85700	BDS NX2 Shock Absorber
(2)	85951	NX2 Shock Absorber

*Subject to change based upon selections

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is."Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.