BDS 6" Performance Coil-Over Suspension Lift Kit (2014 Ford F150 4WD) (1503F) BDS 6" Performance Coil-Over Suspension Lift Kit (2014 Ford F150 4WD) (1503F) BDS Suspension BDS Suspension 6" Coil-Over Suspension Lift Kit for 2014 Ford F150 4WD. Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 6" Ford F150 4WD suspension system featuring Fox 2.5" coil-overs. In place of the factory struts this system uses precision tuned FOX 2.5 remote reservoir coil-overs to maximize travel and achieve superior on and offroad performance. The included Fox 2.5 Coil-Overs can also be upgraded to the DSC (dual speed compression) adjuster equipped coil-overs (more info below) for the ability to perfectly fine tune the ride quality and handling of your Fox coil-overs. This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection. Out back Fox 2.0 shocks keep things under control and the rear lift is achieved with a new 5" block which includes a new offset spring plate to center the rear axle to give your 37's plenty of room. FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits. - LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride. - HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Requires frame bracket modification and welding.2. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.3. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.4. E-brake bracket required for factory powersteps (123018) Block kits replace factory 1-1/4" block.5. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.6. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #1224058. This kit is FMVSS No.126 Compliant The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126. Specifications Lift HeightFront (Base Kit):6 in Strut SpacerRear (Base Kit):5 in Block Tire and Wheel Combinations37" x 12.50" with 18 x 9 and 5" backspacing35" x 12.50" with 18 x 9 and 5" backspacing20 x 9 with 37x12.50 and 5-5.5" backspacing *Trimming may be required* Vehicle Fitment Data Make Model Year Range Ford F150 4WD 2014 Installation Difficulty Level (1 easy â 5 complicated): 4Estimated Installation Time (hours): 8-10 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 013529 09-14 F150 Rear (1) 023622 09 F150 6 In Box 3 Of 4 (1) 023623 09 F150 6 In Box 4 Of 4 (1) 023625 09-14 Ford F150 4-6in Box Kit (1of4) (1) 023626 09-14 Ford F150 4-6in Box Kit (2of4) (1) 88302114 Kit: BDS 14-20 Ford F150 Front Coilover, (2) 98224760 Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1 *Subject to change based upon selections

BDS 6" Performance Coil-Over Suspension Lift Kit (2014 Ford F150 4WD) (1503F)

Code: 1503F
$4,230.20
In Stock
  • FREE SHIPPING

  • 30 DAY RETURNS

  • LIVE SUPPORT

BDS Suspension 6" Coil-Over Suspension Lift Kit for 2014 Ford F150 4WD.

Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 6" Ford F150 4WD suspension system featuring Fox 2.5" coil-overs. In place of the factory struts this system uses precision tuned FOX 2.5 remote reservoir coil-overs to maximize travel and achieve superior on and offroad performance. The included Fox 2.5 Coil-Overs can also be upgraded to the DSC (dual speed compression) adjuster equipped coil-overs (more info below) for the ability to perfectly fine tune the ride quality and handling of your Fox coil-overs.
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection.
Out back Fox 2.0 shocks keep things under control and the rear lift is achieved with a new 5" block which includes a new offset spring plate to center the rear axle to give your 37's plenty of room.

FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology
The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.

- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride. - HSC Adjustment Range

- The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Requires frame bracket modification and welding.
2. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
3. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
4. E-brake bracket required for factory powersteps (123018) Block kits replace factory 1-1/4" block.
5. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
6. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122405
8. This kit is FMVSS No.126 Compliant

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Specifications

Lift Height
Front (Base Kit):6 in Strut Spacer
Rear (Base Kit):5 in Block

Tire and Wheel Combinations
37" x 12.50" with 18 x 9 and 5" backspacing
35" x 12.50" with 18 x 9 and 5" backspacing
20 x 9 with 37x12.50 and 5-5.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Ford F150 4WD 2014


Installation

Difficulty Level (1 easy â 5 complicated): 4
Estimated Installation Time (hours): 8-10

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 013529 09-14 F150 Rear
(1) 023622 09 F150 6 In Box 3 Of 4
(1) 023623 09 F150 6 In Box 4 Of 4
(1) 023625 09-14 Ford F150 4-6in Box Kit (1of4)
(1) 023626 09-14 Ford F150 4-6in Box Kit (2of4)
(1) 88302114 Kit: BDS 14-20 Ford F150 Front Coilover,
(2) 98224760 Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

*Subject to change based upon selections

BDS Suspension 6" Coil-Over Suspension Lift Kit for 2014 Ford F150 4WD.

Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 6" Ford F150 4WD suspension system featuring Fox 2.5" coil-overs. In place of the factory struts this system uses precision tuned FOX 2.5 remote reservoir coil-overs to maximize travel and achieve superior on and offroad performance. The included Fox 2.5 Coil-Overs can also be upgraded to the DSC (dual speed compression) adjuster equipped coil-overs (more info below) for the ability to perfectly fine tune the ride quality and handling of your Fox coil-overs.
This system includes CNC machined steering knuckles to return your vehicle's steering to factory geometry. One piece front & rear High Clearance crossmembers increase rigidity for long term performance as well as dramatically increase ground clearance. A 1/4" thick steel differential skid plate is included to ensure off road protection.
Out back Fox 2.0 shocks keep things under control and the rear lift is achieved with a new 5" block which includes a new offset spring plate to center the rear axle to give your 37's plenty of room.

FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology
The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.

- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride. - HSC Adjustment Range

- The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Requires frame bracket modification and welding.
2. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
3. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
4. E-brake bracket required for factory powersteps (123018) Block kits replace factory 1-1/4" block.
5. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
6. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122405
8. This kit is FMVSS No.126 Compliant

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Specifications

Lift Height
Front (Base Kit):6 in Strut Spacer
Rear (Base Kit):5 in Block

Tire and Wheel Combinations
37" x 12.50" with 18 x 9 and 5" backspacing
35" x 12.50" with 18 x 9 and 5" backspacing
20 x 9 with 37x12.50 and 5-5.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Ford F150 4WD 2014


Installation

Difficulty Level (1 easy â 5 complicated): 4
Estimated Installation Time (hours): 8-10

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 013529 09-14 F150 Rear
(1) 023622 09 F150 6 In Box 3 Of 4
(1) 023623 09 F150 6 In Box 4 Of 4
(1) 023625 09-14 Ford F150 4-6in Box Kit (1of4)
(1) 023626 09-14 Ford F150 4-6in Box Kit (2of4)
(1) 88302114 Kit: BDS 14-20 Ford F150 Front Coilover,
(2) 98224760 Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

*Subject to change based upon selections

IMPORTANT COVID-19 NOTE: 
Our warehouses are open and continuing to ship orders. However, please note that nearly all automotive parts manufacturers, distribution centers, and logistics centers face backorders and delays in order fulfillment.
 
If an item is unexpectedly out of stock or delayed, Lift Kits 4 Vets will make an effort to notify the customer, provide order status updates, and expedite the fulfillment process. If you have any questions pertaining to your order status, please use the Contact link above. We thank you for your patience and understanding.
 
Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is." Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to  Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim,  Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days