BDS 8" 4-Link Arm Suspension Lift Kit (2017-2019 Ford F250/F350 Super Duty 4WD Diesel) (1541H) BDS 8" 4-Link Arm Suspension Lift Kit (2017-2019 Ford F250/F350 Super Duty 4WD Diesel) (1541H) BDS Suspension IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.These 8" 4-link systems are built around BDS's tried and true 4-link conversion offering improved stability, strength and caster control during wheel travel. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. Full length 6" ProRide coil springs are used for the additional ride height and are paired with your choice of BDS NX2 series gas shocks or the premium FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. The 2017 models use a new front driveline design that requires correction at 8" of lift and above to allow for use of 4WD at any speed. To do this BDS supplies a high strength transfer case indexing ring to rotate the front output of the transfer case down to improve the front driveline operating angle. The indexing ring uses ARP studs and includes new mounting hardware. Also supplied is a heavy duty replacement transmission crossmember to allow additional clearance. The rear is lifted with full replacement BDS Glideride leaf springs to provide the lift needed to level the stance. These springs are a 4-leaf design with integrated overload leaf for extra load capacity. They come fully assembled with bushings installed for ease installation and a smooth ride on and off-road. Finishing off the rear of this kit are a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. These new 8" 4-link systems allow for clearance of up to 40" tires. Take your 2017 Super Duty to the next level with BDS Suspension. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)2. 40 x 13.50 tires WILL require trimming.3. Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.4. If your truck is equipped with a factory rear sway bar add: 1230095. Indexing ring has NOT been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required. Specifications Lift Height Front (Base Kit): 8" in Coil SpringsRear (Base Kit): 6" in Leaf Springs Tire and Wheel Combinations38 x 13.50 with 17 x 10 and 5" backspacing40 x 13.50 with 17 x 10 and 5" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Year Range Ford F250/F350 Super Duty 4WD 2017-2019 Installation Difficulty Level (1 easy - 5 complicated): 4Estimated Installation Time (hours): 8-10 InstructionsPDF (click here) Base Kit Components Qty Part# Description (2) 003839 2017 F250/F350 8" Rear Leaf Spring (1) 013601 17-19 Super Duty 4-Link Box Kit 1of2 (1) 013801 2017 Super Duty 8" Front Box Kit (1) 013809 2017 Super Duty 8" Rear Box Kit (1) 033811 8" F250, F350 Coil Springs -diesel (1) 123615 2017 Super Duty T-Case Index - 8in Dsl (1) 85431 NX2 Single Stabilizer (BDS Only) (2) 85721 NX2 Shock Absorber (2) 85779 Shock- 35.50 x 20.40 x 2-3/8 - EB1/EB1 *Subject to change based upon selections

BDS 8" 4-Link Arm Suspension Lift Kit (2017-2019 Ford F250/F350 Super Duty 4WD Diesel) (1541H)

Code: 1541H
$4,197.00
In Stock
  • FREE SHIPPING ($100+)

  • 30 DAY RETURNS

  • LIVE SUPPORT

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


These 8" 4-link systems are built around BDS's tried and true 4-link conversion offering improved stability, strength and caster control during wheel travel. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. Full length 6" ProRide coil springs are used for the additional ride height and are paired with your choice of BDS NX2 series gas shocks or the premium FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets.
The 2017 models use a new front driveline design that requires correction at 8" of lift and above to allow for use of 4WD at any speed. To do this BDS supplies a high strength transfer case indexing ring to rotate the front output of the transfer case down to improve the front driveline operating angle. The indexing ring uses ARP studs and includes new mounting hardware. Also supplied is a heavy duty replacement transmission crossmember to allow additional clearance.
The rear is lifted with full replacement BDS Glideride leaf springs to provide the lift needed to level the stance. These springs are a 4-leaf design with integrated overload leaf for extra load capacity. They come fully assembled with bushings installed for ease installation and a smooth ride on and off-road. Finishing off the rear of this kit are a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. These new 8" 4-link systems allow for clearance of up to 40" tires. Take your 2017 Super Duty to the next level with BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
2. 40 x 13.50 tires WILL require trimming.
3. Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
4. If your truck is equipped with a factory rear sway bar add: 123009
5. Indexing ring has NOT been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required.

Specifications

Lift Height

Front (Base Kit): 8" in Coil Springs
Rear (Base Kit): 6" in Leaf Springs

Tire and Wheel Combinations
38 x 13.50 with 17 x 10 and 5" backspacing
40 x 13.50 with 17 x 10 and 5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Ford F250/F350 Super Duty 4WD 2017-2019

Installation

Difficulty Level (1 easy - 5 complicated): 4
Estimated Installation Time (hours): 8-10

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(2) 003839 2017 F250/F350 8" Rear Leaf Spring
(1) 013601 17-19 Super Duty 4-Link Box Kit 1of2
(1) 013801 2017 Super Duty 8" Front Box Kit
(1) 013809 2017 Super Duty 8" Rear Box Kit
(1) 033811 8" F250, F350 Coil Springs -diesel
(1) 123615 2017 Super Duty T-Case Index - 8in Dsl
(1) 85431 NX2 Single Stabilizer (BDS Only)
(2) 85721 NX2 Shock Absorber
(2) 85779 Shock- 35.50 x 20.40 x 2-3/8 - EB1/EB1

*Subject to change based upon selections

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


These 8" 4-link systems are built around BDS's tried and true 4-link conversion offering improved stability, strength and caster control during wheel travel. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength. Full length 6" ProRide coil springs are used for the additional ride height and are paired with your choice of BDS NX2 series gas shocks or the premium FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets.
The 2017 models use a new front driveline design that requires correction at 8" of lift and above to allow for use of 4WD at any speed. To do this BDS supplies a high strength transfer case indexing ring to rotate the front output of the transfer case down to improve the front driveline operating angle. The indexing ring uses ARP studs and includes new mounting hardware. Also supplied is a heavy duty replacement transmission crossmember to allow additional clearance.
The rear is lifted with full replacement BDS Glideride leaf springs to provide the lift needed to level the stance. These springs are a 4-leaf design with integrated overload leaf for extra load capacity. They come fully assembled with bushings installed for ease installation and a smooth ride on and off-road. Finishing off the rear of this kit are a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance. These new 8" 4-link systems allow for clearance of up to 40" tires. Take your 2017 Super Duty to the next level with BDS Suspension.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required (BDS123402)
2. 40 x 13.50 tires WILL require trimming.
3. Transfer case indexing ring will not fit 6.2L vehicles equipped with the 6R100 transmission.
4. If your truck is equipped with a factory rear sway bar add: 123009
5. Indexing ring has NOT been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required.

Specifications

Lift Height

Front (Base Kit): 8" in Coil Springs
Rear (Base Kit): 6" in Leaf Springs

Tire and Wheel Combinations
38 x 13.50 with 17 x 10 and 5" backspacing
40 x 13.50 with 17 x 10 and 5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Ford F250/F350 Super Duty 4WD 2017-2019

Installation

Difficulty Level (1 easy - 5 complicated): 4
Estimated Installation Time (hours): 8-10

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(2) 003839 2017 F250/F350 8" Rear Leaf Spring
(1) 013601 17-19 Super Duty 4-Link Box Kit 1of2
(1) 013801 2017 Super Duty 8" Front Box Kit
(1) 013809 2017 Super Duty 8" Rear Box Kit
(1) 033811 8" F250, F350 Coil Springs -diesel
(1) 123615 2017 Super Duty T-Case Index - 8in Dsl
(1) 85431 NX2 Single Stabilizer (BDS Only)
(2) 85721 NX2 Shock Absorber
(2) 85779 Shock- 35.50 x 20.40 x 2-3/8 - EB1/EB1

*Subject to change based upon selections

Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is."Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days