BDS 6" 4-Link Suspension Lift Kit 2013-2018 RAM 3500 Pickup 4WD Diesel w/ Rear Air-Ride) (1648H) BDS 6" 4-Link Suspension Lift Kit 2013-2018 RAM 3500 Pickup 4WD Diesel w/ Rear Air-Ride) (1648H) BDS Suspension IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.DIESEL MODELS ONLY. BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks. These lift systems are designed to convert the factory radius arm over to a stronger 4-link design offering improved stability, handling and articulation. The kit is designed with 1/4" fabricated 4-link brackets that key into the factory radius arm pockets for added strength. The 4-link design improves handling and drivability by limiting castor change to less than 1-degree throughout wheel travel. These kits also include 6" diesel engine specific progressive rate front ProRide coil springs, a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember and transfer case indexing ring, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 1226232. The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.3. Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement4. Will NOT fit cab and chassis models5. The shocks used in these kits are different than a standard 3500, do not use a different shock length or damage to the air bag will result.6. Can be used on SRW or DRW models, DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits Specifications Lift HeightFront (Base Kit:) 6" in Coil Spring / 4-LinkRear (Base Kit:) 4" in Lift Block / Spacer Tire and Wheel Combinations37x13.50 with 17x9/18x9/20x9 and 5.625" backspacing37x12.50 with 17x9/18x9/20x9 and 4.5" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Type Year Range Dodge / Ram 3500 Truck 4WD w/ Rear Air-Ride 2013-2018 Installation Difficulty Level (1 easy - 5 complicated): 3Estimated Installation Time (hours): 6-7 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 012403 2013-2018 Ram 3500 4-Link Box Kit (2of2) (1) 012604 2013 Ram 3500 6" 4-Link Box Kit (1of2) (1) 012618 Ram 3500 Auto Level Air Suspension 6in R (1) 032602 13-18 Ram 3500 - 14-18 Ram 2500 6in Coil (1) 122623 13 3500/14 2500 Ram T-Case Index- 6 Bolt (2) 85752 NX2 Shock Absorber (2) 85769 NX2 Shock Absorber *Subject to change based upon selections

BDS 6" 4-Link Suspension Lift Kit 2013-2018 RAM 3500 Pickup 4WD Diesel w/ Rear Air-Ride) (1648H)

Code: 1648H
$3,045.45
In Stock
  • FREE SHIPPING ($100+)

  • 30 DAY RETURNS

  • LIVE SUPPORT

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


DIESEL MODELS ONLY.

BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks.

These lift systems are designed to convert the factory radius arm over to a stronger 4-link design offering improved stability, handling and articulation. The kit is designed with 1/4" fabricated 4-link brackets that key into the factory radius arm pockets for added strength. The 4-link design improves handling and drivability by limiting castor change to less than 1-degree throughout wheel travel. These kits also include 6" diesel engine specific progressive rate front ProRide coil springs, a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember and transfer case indexing ring, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 122623
2. The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
3. Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
4. Will NOT fit cab and chassis models
5. The shocks used in these kits are different than a standard 3500, do not use a different shock length or damage to the air bag will result.
6. Can be used on SRW or DRW models, DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits

Specifications

Lift Height
Front (Base Kit:) 6" in Coil Spring / 4-Link
Rear (Base Kit:) 4" in Lift Block / Spacer

Tire and Wheel Combinations
37x13.50 with 17x9/18x9/20x9 and 5.625" backspacing
37x12.50 with 17x9/18x9/20x9 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Year Range
Dodge / Ram 3500 Truck 4WD w/ Rear Air-Ride 2013-2018


Installation

Difficulty Level (1 easy - 5 complicated): 3
Estimated Installation Time (hours): 6-7

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 012403 2013-2018 Ram 3500 4-Link Box Kit (2of2)
(1) 012604 2013 Ram 3500 6" 4-Link Box Kit (1of2)
(1) 012618 Ram 3500 Auto Level Air Suspension 6in R
(1) 032602 13-18 Ram 3500 - 14-18 Ram 2500 6in Coil
(1) 122623 13 3500/14 2500 Ram T-Case Index- 6 Bolt
(2) 85752 NX2 Shock Absorber
(2) 85769 NX2 Shock Absorber

*Subject to change based upon selections

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


DIESEL MODELS ONLY.

BDS Suspension is now shipping suspension lifts and accessories for the rear air ride equipped RAM 3500 4WD trucks.

These lift systems are designed to convert the factory radius arm over to a stronger 4-link design offering improved stability, handling and articulation. The kit is designed with 1/4" fabricated 4-link brackets that key into the factory radius arm pockets for added strength. The 4-link design improves handling and drivability by limiting castor change to less than 1-degree throughout wheel travel. These kits also include 6" diesel engine specific progressive rate front ProRide coil springs, a heavy duty front track bar bracket, forged drop pitman arm, extended bump stops, brake line relocation brackets, sway bar correction, high clearance transmission crossmember and transfer case indexing ring, rear block and u-bolt kit along with rear air bag lower spacers and sensor brackets. All kits are finished off with your choice of BDS NX2 or FOX 2.0 gas shocks at all 4 corners. These kits allow for up to 37" tires to be installed.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 122623
2. The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
3. Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
4. Will NOT fit cab and chassis models
5. The shocks used in these kits are different than a standard 3500, do not use a different shock length or damage to the air bag will result.
6. Can be used on SRW or DRW models, DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6" kits

Specifications

Lift Height
Front (Base Kit:) 6" in Coil Spring / 4-Link
Rear (Base Kit:) 4" in Lift Block / Spacer

Tire and Wheel Combinations
37x13.50 with 17x9/18x9/20x9 and 5.625" backspacing
37x12.50 with 17x9/18x9/20x9 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Type Year Range
Dodge / Ram 3500 Truck 4WD w/ Rear Air-Ride 2013-2018


Installation

Difficulty Level (1 easy - 5 complicated): 3
Estimated Installation Time (hours): 6-7

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 012403 2013-2018 Ram 3500 4-Link Box Kit (2of2)
(1) 012604 2013 Ram 3500 6" 4-Link Box Kit (1of2)
(1) 012618 Ram 3500 Auto Level Air Suspension 6in R
(1) 032602 13-18 Ram 3500 - 14-18 Ram 2500 6in Coil
(1) 122623 13 3500/14 2500 Ram T-Case Index- 6 Bolt
(2) 85752 NX2 Shock Absorber
(2) 85769 NX2 Shock Absorber

*Subject to change based upon selections

Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is."Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days

Â