BDS 6" Coilover Lift Kit (2009-2013 Ford F150 2WD) (577F) BDS 6" Coilover Lift Kit (2009-2013 Ford F150 2WD) (577F) BDS Suspension IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.Engineered for Next Level Performance These 6" performance coilover systems are designed to take your Tacoma to the next level to maximize performance and capability on and off-road. At the heart of system are FOX 2.5 factory series remote reservoir coilovers built to outperform the competition. These are pretuned for optimal performance and pre-set for correct ride height right out of the box. From there these kits utilize heavy duty front & rear crossmembers, full width belly skidplate and multipoint differential relocation brackets to create a solid subframe to mount the suspension components and improved offroad protection. These combined with the high strength ductile iron steering knuckles offer optional on-road handling with ESC System compatibility along with improved ground clearance for better offroad performance. Additionally this kit includes bump stop brackets, sway bar relocation, lower control arm cams and brake line brackets. In the rear 4" lift blocks are supplied along with longer u-bolts and brake line brackets to set the rear up and level out the stance. Finishing off the rear are FOX 2.0 performance series IFP gas shocks. This system will also fit 2wd PreRunner models, but will not work on the standard 2wd model. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Strut compressor required for installation.2. Requires frame bracket modification.3. 17" wheels will not work with this system, aftermarket 18" or larger must be used.4. If using 18x9 wheels with 5-5.5" of backspace, dry fit the wheels to check for proper tie rod clearance. Some wheel manufacturing variances may affect this clearance.5. Stock 20's with up to 305/60R20 tires can be re-installed, but stock 17" & 18" will not fit.6. Vehicles equipped with factory power steps will require part # 123018. This is an additional emergency brake drop bracket. This item is available in the customize your kit section.7. Will fit EcoBoost models.8. Certain models with a 2-piece rear driveshaft may require carrier bearing drop shim kit 122406 listed in the accessories.9. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.10 Will not fit HD models (7 lug).11. This kit is FMVSS No.126 Compliant Specifications Lift HeightFront (Base Kit): 6 in Coil-Over SystemRear (Base Kit): 4 in Block Tire and Wheel Combinations35 x 12.50 with 18 x 9 and 4.5" Max. backspacing- with 20 x 9 and 4.5" Max. backspacing*Trimming may be required* Vehicle Fitment Data Make Model Year Range Ford F150 2WD 2009-2013 Installation Difficulty Level (1 easy - 5 complicated): 3Estimated Installation Time (hours): 6-8 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 018408 05-12 Tacoma 4in Rear Block Kit (1) 028600 05-17 Tacoma Front Box Kit 1 of 4 (1) 028612 2016-17 Tacoma Front Box Kit 3 of 4 (1) 028621 2017 Tacoma Front Box Kit 2 of 4 (1) 88302048 Kit: BDS 05-20 Tacoma Front Coilover, 2. (2) 98224953 Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1 *Subject to change based upon selections

BDS 6" Coilover Lift Kit (2009-2013 Ford F150 2WD) (577F)

Code: 577F
$3,882.75
In Stock
  • FREE SHIPPING ($100+)

  • 30 DAY RETURNS

  • LIVE SUPPORT

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


Engineered for Next Level Performance

These 6" performance coilover systems are designed to take your Tacoma to the next level to maximize performance and capability on and off-road. At the heart of system are FOX 2.5 factory series remote reservoir coilovers built to outperform the competition. These are pretuned for optimal performance and pre-set for correct ride height right out of the box. From there these kits utilize heavy duty front & rear crossmembers, full width belly skidplate and multipoint differential relocation brackets to create a solid subframe to mount the suspension components and improved offroad protection. These combined with the high strength ductile iron steering knuckles offer optional on-road handling with ESC System compatibility along with improved ground clearance for better offroad performance. Additionally this kit includes bump stop brackets, sway bar relocation, lower control arm cams and brake line brackets.

In the rear 4" lift blocks are supplied along with longer u-bolts and brake line brackets to set the rear up and level out the stance. Finishing off the rear are FOX 2.0 performance series IFP gas shocks. This system will also fit 2wd PreRunner models, but will not work on the standard 2wd model.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Strut compressor required for installation.
2. Requires frame bracket modification.
3. 17" wheels will not work with this system, aftermarket 18" or larger must be used.
4. If using 18x9 wheels with 5-5.5" of backspace, dry fit the wheels to check for proper tie rod clearance. Some wheel manufacturing variances may affect this clearance.
5. Stock 20's with up to 305/60R20 tires can be re-installed, but stock 17" & 18" will not fit.
6. Vehicles equipped with factory power steps will require part # 123018. This is an additional emergency brake drop bracket. This item is available in the customize your kit section.
7. Will fit EcoBoost models.
8. Certain models with a 2-piece rear driveshaft may require carrier bearing drop shim kit 122406 listed in the accessories.
9. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
10 Will not fit HD models (7 lug).
11. This kit is FMVSS No.126 Compliant

Specifications

Lift Height
Front (Base Kit): 6 in Coil-Over System
Rear (Base Kit): 4 in Block

Tire and Wheel Combinations
35 x 12.50 with 18 x 9 and 4.5" Max. backspacing
- with 20 x 9 and 4.5" Max. backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Ford F150 2WD 2009-2013


Installation

Difficulty Level (1 easy - 5 complicated): 3
Estimated Installation Time (hours): 6-8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 018408 05-12 Tacoma 4in Rear Block Kit
(1) 028600 05-17 Tacoma Front Box Kit 1 of 4
(1) 028612 2016-17 Tacoma Front Box Kit 3 of 4
(1) 028621 2017 Tacoma Front Box Kit 2 of 4
(1) 88302048 Kit: BDS 05-20 Tacoma Front Coilover, 2.
(2) 98224953 Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1

*Subject to change based upon selections

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


Engineered for Next Level Performance

These 6" performance coilover systems are designed to take your Tacoma to the next level to maximize performance and capability on and off-road. At the heart of system are FOX 2.5 factory series remote reservoir coilovers built to outperform the competition. These are pretuned for optimal performance and pre-set for correct ride height right out of the box. From there these kits utilize heavy duty front & rear crossmembers, full width belly skidplate and multipoint differential relocation brackets to create a solid subframe to mount the suspension components and improved offroad protection. These combined with the high strength ductile iron steering knuckles offer optional on-road handling with ESC System compatibility along with improved ground clearance for better offroad performance. Additionally this kit includes bump stop brackets, sway bar relocation, lower control arm cams and brake line brackets.

In the rear 4" lift blocks are supplied along with longer u-bolts and brake line brackets to set the rear up and level out the stance. Finishing off the rear are FOX 2.0 performance series IFP gas shocks. This system will also fit 2wd PreRunner models, but will not work on the standard 2wd model.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Strut compressor required for installation.
2. Requires frame bracket modification.
3. 17" wheels will not work with this system, aftermarket 18" or larger must be used.
4. If using 18x9 wheels with 5-5.5" of backspace, dry fit the wheels to check for proper tie rod clearance. Some wheel manufacturing variances may affect this clearance.
5. Stock 20's with up to 305/60R20 tires can be re-installed, but stock 17" & 18" will not fit.
6. Vehicles equipped with factory power steps will require part # 123018. This is an additional emergency brake drop bracket. This item is available in the customize your kit section.
7. Will fit EcoBoost models.
8. Certain models with a 2-piece rear driveshaft may require carrier bearing drop shim kit 122406 listed in the accessories.
9. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance.
10 Will not fit HD models (7 lug).
11. This kit is FMVSS No.126 Compliant

Specifications

Lift Height
Front (Base Kit): 6 in Coil-Over System
Rear (Base Kit): 4 in Block

Tire and Wheel Combinations
35 x 12.50 with 18 x 9 and 4.5" Max. backspacing
- with 20 x 9 and 4.5" Max. backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Year Range
Ford F150 2WD 2009-2013


Installation

Difficulty Level (1 easy - 5 complicated): 3
Estimated Installation Time (hours): 6-8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 018408 05-12 Tacoma 4in Rear Block Kit
(1) 028600 05-17 Tacoma Front Box Kit 1 of 4
(1) 028612 2016-17 Tacoma Front Box Kit 3 of 4
(1) 028621 2017 Tacoma Front Box Kit 2 of 4
(1) 88302048 Kit: BDS 05-20 Tacoma Front Coilover, 2.
(2) 98224953 Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1

*Subject to change based upon selections

Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is."Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days