BDS 5.5" Suspension Lift Kit w/Fox 2.5 Remote Reservoir Coil-Overs (2015-2022 Chevy/GMC Colorado/Canyon 4WD) (722F) BDS 5.5" Suspension Lift Kit w/Fox 2.5 Remote Reservoir Coil-Overs (2015-2022 Chevy/GMC Colorado/Canyon 4WD) (722F) BDS Suspension IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.BDS 5.5" Performance Suspension System featuring Fox 2.5 Remote Reservoir Coil-overs for 2015-19 Chevy/GMC Colorado/Canyon 4WD trucks. BDS raises the bar once again with new 5.5" Performance Coilover Systems for the 2015-2019 Colorado/Canyon. Designed around the tried-and-true steering knuckle and crossmember technology, these kits provide enough lift fit 33" tires while maintaining the OE suspension geometry for smooth handling and ride characteristics. Along with the rugged, high clearance design to maximize ground clearance, this new system has passed the National Highway Traffic Safety Administration's Federal Motor Vehicle Safety Standard (FMVSS) No.126 and has been independently certified to not adversely affect the vehicles factory installed electronic stability control system with the lift installed. That combined with BDS No Fine Print Warranty and a 5-year 60,000-mile drivetrain warranty gives you the peace of mind wherever and however you use and abuse your truck. This system uses a pair of heavy duty 1/4" steel high clearance crossmembers to reposition the lower control arms and work in unison with the massive ductile cast iron extended steering knuckles. The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects vital front end components for offroad use and ties the crossmembers together for an extremely rigid sub-frame. The front differential is relocated to keep CV axle angles at a minimum and function properly with the supplied transfer case indexing ring. This allows for the use of the factory front driveline once lifted. Front bump stop extension and sway bar links are included as well as new heavy duty Moog tie rod ends to properly set alignment without trimming the inner tie rods. In place of the factory struts this system uses precision tuned FOX 2.5 remote reservoir coil-overs to achieve superior on and offroad performance. The included Fox 2.5 Coil-Overs can also be upgraded to the DSC (dual speed compression) adjuster equipped coil-overs (more info below) for the ability to perfectly fine tune the ride quality and handling of your Fox coil-overs. Finishing off this new 5.5" coilover system, a 4" rear block/u-bolt kit sets the new ride height and levels the stance. Specially tuned FOX 2.0 series IFP gas shocks are supplied to compliment the front coilovers and improve the Colorado/Canyon's performance on or offroad. FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits. - LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride. - HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads. Choose between Fox 2.5 Remote Reservoir Coil-Overs or 2.5 Remote Reservoir Coil-Overs with DSC (Dual Speed Compression) adjuster. Note: Components displayed in images may change based upon selections. Important Kit Notes 1. Inner fender trimming is required.2. Minor welding is required.3. Electronic assisted power steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur.4. Actual ride height on C/O kits is closer to 6'' of lift.5. Stock 17" & 18" wheels can NOT be reinstalled with the lift kit. Aftermarket 20" wheels with maximum of 5.25" Backspacing are recommended - certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of inst. sheet for details on installation.6. Will NOT fit ZR2 Models.7. Will fit diesel models. Specifications Lift HeightFront (Base Kit):5.5" in Coil-overRear (Base Kit):4" in Block Tire and Wheel Combinations305/55R20 with 20 x 9 and 5.25" backspacing305/70R17 with 17x9 or 18x9 and 4.5" backspacing295/70R17 with 17x8 or 18x8 and 4.5" backspacing*Trimming may be required* Vehicle Fitment Data Make Model Lift Year Range Chevy / GMC Colorado/Canyon 5.5" 2015-2022 Installation Difficulty Level (1 easy - 5 complicated): 4Estimated Installation Time (hours): 8 InstructionsPDF (click here) Base Kit Components Qty Part# Description (1) 011406 2015 Colorado 4" Rear Block Box Kit (1) 021670 2015 Colorado Front Box Kit 1of4 (1) 021671 2015 Colorado Front Box Kit 2of4 (1) 021672 2015 Colorado Front Box Kit 3of4 (1) 021673 2015 Colorado Front Box Kit 4of4 (1) 88302136 Kit: BDS 15-20 GM Colorado/Canyon Front (2) 98224758 Fox 2.0 Shock 27.95 x 17.35 x 2- EB1/EB1 *Subject to change based upon selections

BDS 5.5" Suspension Lift Kit w/Fox 2.5 Remote Reservoir Coil-Overs (2015-2022 Chevy/GMC Colorado/Canyon 4WD) (722F)

Code: 722F
$4,141.20
In Stock
  • FREE SHIPPING ($100+)

  • 30 DAY RETURNS

  • LIVE SUPPORT

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


BDS 5.5" Performance Suspension System featuring Fox 2.5 Remote Reservoir Coil-overs for 2015-19 Chevy/GMC Colorado/Canyon 4WD trucks.

BDS raises the bar once again with new 5.5" Performance Coilover Systems for the 2015-2019 Colorado/Canyon. Designed around the tried-and-true steering knuckle and crossmember technology, these kits provide enough lift fit 33" tires while maintaining the OE suspension geometry for smooth handling and ride characteristics. Along with the rugged, high clearance design to maximize ground clearance, this new system has passed the National Highway Traffic Safety Administration's Federal Motor Vehicle Safety Standard (FMVSS) No.126 and has been independently certified to not adversely affect the vehicles factory installed electronic stability control system with the lift installed. That combined with BDS No Fine Print Warranty and a 5-year 60,000-mile drivetrain warranty gives you the peace of mind wherever and however you use and abuse your truck.

This system uses a pair of heavy duty 1/4" steel high clearance crossmembers to reposition the lower control arms and work in unison with the massive ductile cast iron extended steering knuckles. The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects vital front end components for offroad use and ties the crossmembers together for an extremely rigid sub-frame. The front differential is relocated to keep CV axle angles at a minimum and function properly with the supplied transfer case indexing ring. This allows for the use of the factory front driveline once lifted. Front bump stop extension and sway bar links are included as well as new heavy duty Moog tie rod ends to properly set alignment without trimming the inner tie rods.

In place of the factory struts this system uses precision tuned FOX 2.5 remote reservoir coil-overs to achieve superior on and offroad performance. The included Fox 2.5 Coil-Overs can also be upgraded to the DSC (dual speed compression) adjuster equipped coil-overs (more info below) for the ability to perfectly fine tune the ride quality and handling of your Fox coil-overs.

Finishing off this new 5.5" coilover system, a 4" rear block/u-bolt kit sets the new ride height and levels the stance. Specially tuned FOX 2.0 series IFP gas shocks are supplied to compliment the front coilovers and improve the Colorado/Canyon's performance on or offroad.

FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology

The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.

- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride.

- HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.

Choose between Fox 2.5 Remote Reservoir Coil-Overs or 2.5 Remote Reservoir Coil-Overs with DSC (Dual Speed Compression) adjuster.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Inner fender trimming is required.
2. Minor welding is required.
3. Electronic assisted power steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur.
4. Actual ride height on C/O kits is closer to 6'' of lift.
5. Stock 17" & 18" wheels can NOT be reinstalled with the lift kit. Aftermarket 20" wheels with maximum of 5.25" Backspacing are recommended - certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of inst. sheet for details on installation.
6. Will NOT fit ZR2 Models.
7. Will fit diesel models.

Specifications

Lift Height
Front (Base Kit):5.5" in Coil-over
Rear (Base Kit):4" in Block

Tire and Wheel Combinations
305/55R20 with 20 x 9 and 5.25" backspacing
305/70R17 with 17x9 or 18x9 and 4.5" backspacing
295/70R17 with 17x8 or 18x8 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Lift Year Range
Chevy / GMC Colorado/Canyon 5.5" 2015-2022


Installation

Difficulty Level (1 easy - 5 complicated): 4
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 011406 2015 Colorado 4" Rear Block Box Kit
(1) 021670 2015 Colorado Front Box Kit 1of4
(1) 021671 2015 Colorado Front Box Kit 2of4
(1) 021672 2015 Colorado Front Box Kit 3of4
(1) 021673 2015 Colorado Front Box Kit 4of4
(1) 88302136 Kit: BDS 15-20 GM Colorado/Canyon Front
(2) 98224758 Fox 2.0 Shock 27.95 x 17.35 x 2- EB1/EB1

*Subject to change based upon selections

IMPORTANT: ALWAYS READ THE ENTIRE PRODUCT DESCRIPTION, INCLUDING NOTES AND FITMENT INFORMATION, BEFORE MAKING YOUR PURCHASE. FOR THE MOST UP-TO-DATE INFORMATION, REFERENCE THE MANUFACTURER'S PRODUCT PAGE.


BDS 5.5" Performance Suspension System featuring Fox 2.5 Remote Reservoir Coil-overs for 2015-19 Chevy/GMC Colorado/Canyon 4WD trucks.

BDS raises the bar once again with new 5.5" Performance Coilover Systems for the 2015-2019 Colorado/Canyon. Designed around the tried-and-true steering knuckle and crossmember technology, these kits provide enough lift fit 33" tires while maintaining the OE suspension geometry for smooth handling and ride characteristics. Along with the rugged, high clearance design to maximize ground clearance, this new system has passed the National Highway Traffic Safety Administration's Federal Motor Vehicle Safety Standard (FMVSS) No.126 and has been independently certified to not adversely affect the vehicles factory installed electronic stability control system with the lift installed. That combined with BDS No Fine Print Warranty and a 5-year 60,000-mile drivetrain warranty gives you the peace of mind wherever and however you use and abuse your truck.

This system uses a pair of heavy duty 1/4" steel high clearance crossmembers to reposition the lower control arms and work in unison with the massive ductile cast iron extended steering knuckles. The crossmembers utilize the factory alignment eccentrics and tie together with a full-width skid plate. The skid plate protects vital front end components for offroad use and ties the crossmembers together for an extremely rigid sub-frame. The front differential is relocated to keep CV axle angles at a minimum and function properly with the supplied transfer case indexing ring. This allows for the use of the factory front driveline once lifted. Front bump stop extension and sway bar links are included as well as new heavy duty Moog tie rod ends to properly set alignment without trimming the inner tie rods.

In place of the factory struts this system uses precision tuned FOX 2.5 remote reservoir coil-overs to achieve superior on and offroad performance. The included Fox 2.5 Coil-Overs can also be upgraded to the DSC (dual speed compression) adjuster equipped coil-overs (more info below) for the ability to perfectly fine tune the ride quality and handling of your Fox coil-overs.

Finishing off this new 5.5" coilover system, a 4" rear block/u-bolt kit sets the new ride height and levels the stance. Specially tuned FOX 2.0 series IFP gas shocks are supplied to compliment the front coilovers and improve the Colorado/Canyon's performance on or offroad.

FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology

The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.

- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride.

- HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.

Choose between Fox 2.5 Remote Reservoir Coil-Overs or 2.5 Remote Reservoir Coil-Overs with DSC (Dual Speed Compression) adjuster.

Note: Components displayed in images may change based upon selections.

Important Kit Notes

1. Inner fender trimming is required.
2. Minor welding is required.
3. Electronic assisted power steering system is sensitive to out of round, unbalanced, and more aggressive tread pattern tires. High speed steering wheel feedback can occur.
4. Actual ride height on C/O kits is closer to 6'' of lift.
5. Stock 17" & 18" wheels can NOT be reinstalled with the lift kit. Aftermarket 20" wheels with maximum of 5.25" Backspacing are recommended - certain wheel and tire combinations will require weld on steering stops, these are included in the kit. See end of inst. sheet for details on installation.
6. Will NOT fit ZR2 Models.
7. Will fit diesel models.

Specifications

Lift Height
Front (Base Kit):5.5" in Coil-over
Rear (Base Kit):4" in Block

Tire and Wheel Combinations
305/55R20 with 20 x 9 and 5.25" backspacing
305/70R17 with 17x9 or 18x9 and 4.5" backspacing
295/70R17 with 17x8 or 18x8 and 4.5" backspacing
*Trimming may be required*

Vehicle Fitment Data

Make Model Lift Year Range
Chevy / GMC Colorado/Canyon 5.5" 2015-2022


Installation

Difficulty Level (1 easy - 5 complicated): 4
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Base Kit Components

Qty Part# Description
(1) 011406 2015 Colorado 4" Rear Block Box Kit
(1) 021670 2015 Colorado Front Box Kit 1of4
(1) 021671 2015 Colorado Front Box Kit 2of4
(1) 021672 2015 Colorado Front Box Kit 3of4
(1) 021673 2015 Colorado Front Box Kit 4of4
(1) 88302136 Kit: BDS 15-20 GM Colorado/Canyon Front
(2) 98224758 Fox 2.0 Shock 27.95 x 17.35 x 2- EB1/EB1

*Subject to change based upon selections

Product Availability

To check stock levels, use our Live-Chat feature or Contact page. See the Lead Times tab for average order fulfillment times by manufacturer.

Note that some items ship directly from the manufacturer. For these items, the manufacturer may not provide real-time inventory data to Lift Kits 4 Vets and backorders are possible. If an item is unavailable, Lift Kits 4 Vets will contact the buyer with an estimated ship date. In the event of excessive manufacturer backorders or delays, Lift Kits 4 Vets may opt to cancel the order and provide a full refund.

Shipping

Lift Kits 4 Vets provides shipping within the contiguous 48 states only. For orders outside of this area, please use the Contact page prior to placing your order. Items shipped by ground or LTL generally arrive within 1-5 days from date of shipment. Lift Kits 4 Vets is not responsible for carrier shipping delays.

Returns & Refunds

Items in their original condition may be returned within 30 days from the date of purchase for a full refund. Items may NOT be returned once packaging has been opened or the item has been installed, otherwise used, or damaged. The buyer is responsible for all return shipping charges. Returns and refunds may be requested through the Contact page.

Note: Do NOT ship items back until you have received a return authorization, as items may be returned to a facility other than their point of origin. Refunds will generally be processed within 48 business hours of receipt at our warehouse in order to allow for inspection and processing.

Product Data
Lift Kits 4 Vets provides product data (including but not limited to item descriptions, important notes, and fitment information) as a courtesy only. This information is provided by product manufacturers and is assumed to be accurate at the time of publishing. Though Lift Kits 4 Vets may periodically audit and update some product information based upon manufacturer's published data revisions, Lift Kits 4 Vets does not guarantee the accuracy of any product data. Lift Kits 4 Vets reserves the right to update product data as necessary and without notice, and will not be held responsible for misprints, or changes/variations made by vehicle manufacturers. Customers should consult the product manufacturer's website for the most up-to-date product data.
 
Markdown & Open Box Items
Markdown and Open Box items are offered at a discount as they have either been overstocked, slightly damaged, and/or returned from a previous customer. Items are sold "as-is."Lift Kits 4 Vets will indicate any damage found during the inspection process. Please note that this does not guarantee that all defects have been identified. Sales for all items in this category are final. No refunds, exchanges, or replacements are permitted. Some manufacturers may continue to warranty such items; however, the purchaser accepts that some manufacturers may not extend warranties to items in this category. Please refer to the individual product manufacturer's warranty page for details.

F.A.Q.
How do I request a return?
Use the Contact page, ensuring to include your order number, contact information, items for return, and reason for return. One of our team members will contact you with return shipping details and instructions. Additional information and documentation may be required.
Note: Some items must be returned directly to the manufacturer. Please do not ship items to Lift Kits 4 Vets prior to return authorization and return instructions.

How do I request a replacement for a missing or damaged part?
Upon receipt, please inspect all orders for completion, accuracy, and damage. If packaging appears to be damaged, ensure to photograph the damage, as this may be required for a shipping carrier claim.
Use the Contact page, ensuring to include your order number, contact information, and description of the incorrect or damaged part(s). One of our team members will contact you to correct the issue.

What product warranties does Lift Kits 4 Vets offer?
Product warranties are solely offered by product manufacturers. Please refer to the product manufacturer's warranty statement. In the event of a warranty claim, Lift Kits 4 Vets is available to assist with the manufacturer's required documentation. Please use the Contact page if assistance is required.
Estimated order processing times for in-stock items.
To check stock levels, use our Live-Chat feature or Contact page.
 
 Manufacturer Estimated Lead Time
BDS Suspension
1-2 Days
Morimoto 1-2 Days
ReadyLIFT Suspensions 1-7 Days
Rough Country 1-2 Days
Zone Offroad 1-2 Days